Catalog FORMAT plus - EDE 2015 - 2017

Milling Cutters 356

Solid Carbide Multi Flute Necked End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to company standard, 45°, TiAlN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling. For large milling depths up to 3 x D. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. With corner radius to avoid notching effects on the workpiece. Suitable for HSC machining up to 62 HRC .

Solid carbide UF

Z 6

Type H

Factory standard

DIN 6535-HA

HSC

45°

7°

2 Cutting Tools

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2496

127

77

77

77

77

53

127

53

6WHHOV XSWR +5F f z mm

2496

dia. d 1 mm

Order No.

Corner radius r mm

Cutting edge length l 2 mm

Overall length l 1 mm

Neck dia. d 3 mm

Clear area l 3 mm

Shank dia. d 2 = h6 mm

TiAlN

0600 0800 1010 1210

6 8

35.70 43.00 66.50 79.40

0.5 0.5 1.0 1.0

6 8

50 60 70 75

5.70 7.65 9.65

14 24 30 30

6 8

0.006 0.010 0.011 0.011

10 12

10 12

10 12

11.60

(212)

Solid Carbide Long Series Multi Flute End Mill with Corner Radius for Hard Machining

Design: Ultra-fine grit solid carbide, type H, according to company standard, 45°, TiAlN-coated, with centre cut. Cutting speed approx. 50% higher than with non-coated tools. Dry machining possible. Application: Can be used for peripheral milling. The 45° spiral results in a soft and peeling cut and thus a high surface quality. Burr formation on the cutting edges is avoided. With corner radius to avoid notching effects on the workpiece. Suitable for HSC machining up to 62 HRC .

Solid carbide UF

Z 6

Type H

Factory standard

DIN 6535-HA

HSC

45°

1°

TiAlN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

2497

411

316

316

316

159

159

411

159

6WHHOV XSWR +5F f z mm

2497

dia.

Order No.

Corner radius r mm

Cutting edge length l 2 mm

Overall length l 1 mm

Shank dia. d 2 = h6 mm

d 1

= e8

mm

TiAlN

0600 0800 1000 1010 1200 1210 1610 1615 2010 2015 2020

6 8

40.40 51.20 76.70 76.70

0.5 0.5 0.5 1.0 0.5 1.0 1.0 1.5 1.0 1.5 2.0

13 19 22 22 26 26 32 32 38 38 38

70 90

6 8

0.030 0.039 0.048 0.048 0.050 0.050 0.050 0.050 0.050 0.050 0.050

10 10 12 12 16 16 20 20 20

100 100 110 110 130 130 140 140 140

10 10 12 12 16 16 20 20 20

104.00 104.00 175.00 191.00 257.50 281.00 281.00

(212)

2/110

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).