Catalog FORMAT plus - EDE 2015 - 2017

385

Jigsaw blades

Jig saw blades for metal in storage box

Tooth design: Teeth milled, side clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics. Design: 25 pieces in a box. Suitable for: Bosch, AEG, Milwaukee, DeWalt, LU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

Saw blade quality: HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost non-breakable combination of HCS and HSS, long service life. Can be used for hard woods, abrasive ooden materials, hard plastic, non-ferrous metals and metals.

2739

2738

Bosch No.

Order No.

Cutting length mm

Material

Metal

Tooth pitch

Type of tooth Use

mm

mm

2 Cutting Tools

0025

T 118 A

26.40

30.40

67

HSS

1–3 progressive 1.1–1.5

Milled, wavy set

For thin metal sheets, with plunge tip.

0045

T 118 AF

–

40.20

67

Bimetal

1–3 progressive 1.1–1.5

Milled, wavy set

For thin metal sheets.

(248)

(247)

Jig saw blades for stainless steel

Saw blade quality: Bimetal: Highly flexible, almost non-breakable combination of HCS and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance wavy set Blade with fine result for straight cuts in soft steel, aluminium non-ferrous metals and plastics.

Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Application:

Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants e.g. cutting oil (for steel, metals) is recommended in order to extend the wear-resistance of the saw blade. Design: 5 pieces on card, (exception: 2736 0109, 3 pieces on card.) Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

2736

Bosch No.

Order No. 0057

Cutting length mm

Material

Metal mm

Tooth pitch mm

Type of tooth

Use

T 118 GFS

11.40

57

Bimetal

0.5–1.5

0.8

Wavy set; milled

For stainless steel materials.

0068

T 118 EFS

11.40

57

Bimetal

1.5–4

1.4

Wavy set; milled

For stainless steel materials.

0108

T 118 AHM

21.10

59

TC

1.5–3

1.1

carbide tipped; ground

For working thin stainless steel sheets, with reduced stroke rate, cooling, without orbital action.

0109

T 118 EHM

21.10

59

TC

2–5

1.4

carbide tipped; ground

For working medium stainless steel sheets, with reduced stroke rate, cooling, without orbital action.

(247)

2/139

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.