Catalog FORMAT plus - EDE 2015 - 2017

Jigsaw blades 386

Jig saw blade for ceramic products

Saw blade quality: Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade. Design: 3 pieces on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

2736

2 Cutting Tools

Bosch No.

Order No.

Cutting length

Material

Ceramic materials mm

Type of tooth

Use

mm

0111

T 130 Riff

12.15

59

TC

5–15

Carbide-tipped

For soft ceramic wall tiles, GRP, cast iron, coarse cut.

(247)

m

Saw blade quality: HCS: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost unbreakable combination of HCS and HSS. The area of applica- tion covers hard wood, abrasive wooden materials, hard plastics, non-ferrous metals and metals. Tooth design: Teeth milled, side clearance side set. Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Teeth milled, side clearance lead angle ground. Blade with taper ground back for side clearance; for precise, fine and clean cuts in wood and plastic. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of pecific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade. Design: 5 pieces on card. Suitable for FEIN. Jig saw blades for wood and sheet, suitable for FEIN jig saws

2736

Bosch No.

Order No.

Total length mm

Material

Metal sheets mm

Soft wood mm

Tooth pitch mm

Type of tooth

Use

0180

F 1 D

6.70

88

HCS

– 10.0–45.0 4.0

Lead angle ground, teeth ground

For soft wood, chipboard, wood core plywood, fibre boards (10-45 mm).

0185

F 18 G

6.70

77

HSS 0.5–1.5

–

0.7

Wavy, milled

For very thin metal sheets (0.5–1.5 mm).

0190

F 18 AF

9.70

88

BIM 1.0–3.0

–

1.2

Wavy, milled

For thin metal sheets (1–3 mm).

0195

F 18 BF

9.70

88

BIM 2.5–6.0

–

2.0

Wavy, milled

For medium sheets (2.5–6 mm).

0200

F 127 DF

10.20

100

BIM 3.0–15.0 –

3.0

Side set, milled

For thin to thick sheets (3-15 mm).

(247)

2/140

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).