Catalog FORMAT plus - EDE 2015 - 2017

387

Sabre saw blade

Teeth ground, side clearance lead angle ground: Blade with taper ground back for side clearance; for precise, fine and clean cuts in wood and plastic. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade.

Sabre saw blades for wood Saw blade quality: HCS: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. Tooth design: Teeth ground, side clearance side set. Blade for clean, fast cuts in wood and plastic. Tooth pitch: Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Saw blade quality: HCS: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. Bimetal: Highly flexible, almost unbreakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Teeth milled, clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics. Teeth ground, side clearance side set: Blade for clean, fast cuts in wood.

2 Cutting Tools

Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade.

Design: 5 pieces in PVC pouch, (exception: 2748, 25 pieces.) Suitable for: All sabre, reciprocal and tiger saws with standard shank.

2746 0007 For timber (< 150 mm), boards: chipboard, MDF (6–60 mm), plywood, plastic (< 150 mm), wooden wall (< 150 mm). Effortless fine cut.

2744/46/48 0010 For timber, wooden walls, boards: chipboard, MDF, plywood, plastic, specially designed for plunge cuts.

2744/46/48 0020 For rough wood, nail-free, green wood, pruning, firewood.

2748

2744 2746

Bosch No.

Order No.

Total length

Mate- rial

Rough wood, nail-free mm

Timber

Boards

Wooden wall cutout mm

Green wood, pruning mm

Plas- tics, epoxy mm

Tooth pitch

Type of tooth

mm

mm

mm

mm

0007 S 2345 X

–

19.85

–

200 HCS –

< 150 6–60 < 150

– < 150 2.5–4.3/ 6–10

side set; ground

0010 S 644 D 10.95 12.65 57.10 *

150 HCS –

< 100 6–60 < 100

– < 100 4.3 side set; ground < 190 – 5.0 side set; ground

0020 S 1531 L 17.25 19.90 89.10 *

240 HCS < 190

–

–

–

* 25 pieces

(248)

(247)

(247)

Sabre saw blades for special applications

Saw blade quality: Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth ground, side clearance side set. Blade for clean, fast cuts in wood and plastic.

Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific

coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear- resistance of the saw blade. Design: 2 pieces in PVC pouch. Suitable for: All sabre, reciprocal and tiger saws with standard shank.

2746 0140 For cast steel pipes, brick (red), GRP/epoxy.

2746 0130 For aerated concrete, brick (red), fibre cement, GRP/epoxy, for abrasive materials.

2746 0090 For working stainless steel sheets, stainless steel profiles, GRP/epoxy, metal reduced stroke rate, with cooling without orbital action.

Bosch No. 2746

Order No.

Total length

Material

Fibre cement

Porous concrete (aerated concrete) ≥ PB2, PP2 mm

Red brick

GRP, epoxy

INOX steel sheets mm

Stainless steel profiles mm

Type of tooth

mm 225 225 115

mm

mm

mm

0140 S 1130 RIFF 16.25 0130 S 1141 HM 33.30 0090 S 518 EHM 22.40

TC

–

–

< 175 < 175 < 175 < 150

– –

– –

coated

TC < 175

< 175

side set; ground

TC

–

–

–

< 50

2–4 < 50

ground

(247)

2/141

Articles marked ◊ are not held in stock, procurement is effected at short notice.