Catalog FORMAT plus - EDE 2015 - 2017

Sabre saw blade 388

Sabre saw blades for wood and metal

Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of spe- cific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear- resistance of the saw blade.

Saw blade quality: Bimetal: Highly flexible, almost non-breakable combination of HCS and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/ or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.

Design: 5 pieces in PVC pouch, (exception: 2748, 25 pieces.) Suitable for: All sabre, reciprocal and tiger saws with standard shank.

2 Cutting Tools

2744 0050 For pallet repairs, wood with nails/metal, metal sheets, pipes, aluminium profiles. For wood with nails/metal.

2746 0052 For wood with nails/metal, chipboard, porous concrete, plastic/GRP, profiles.

2748 0055 For pallet repairs, wood with nails/metal, metal sheets, pipes, aluminium profiles.

2744 0056 For wood with nails/metal. Plastic profiles (dia. 3–250 mm).

2746/48 0060 For wood with nails/metal, chipboard, metal sheets, pipes, aluminium profiles, plastics/ GRP, solid window frames: wood plus metal, specially designed for plunge cuts.

2746 0066 For wood with nails/metal, chipboard, metal sheets, aluminium, plastic/GRP, profiles.

2746/48 0075 For wood with nails/metal, metal sheets, pipes, aluminium profiles, plastic profiles.

2746 0240 For wood with nails/metal (< 250 mm), metal sheets, aluminium profiles (3–10 mm), GRP/ epoxy (∅ < 250 mm), flexible flush cut.

2744/46/48 0080 For wood with nails/metal, metal sheets, pipes, aluminium profiles, flexible flush cut. For wood with nails/metal. Plastic profiles (dia. 3–175 mm).

2748

Bosch No. 2744 2746

Type of tooth

Tooth pitch

Plastics, epoxy

Pallets

Wood, chip- board

Plastics: pipes, profiles

Material Wood with

Sheet metal, pipes, profiles mm

Order No.

Total length

nails/ metal mm

mm

mm

mm

mm

mm

mm

0035

S 922 EF

–

–

61.30 * m

150 Bimetal < 100 – –

–

– – 1.4/18 side set; milled

0050

S 922 HF 11.80

–

–

150 Bimetal < 100 < 100 – 3–12 – – 2.5 side set; milled 300 Bimetal < 250 – < 250 – < 250 < 60 4.3/6 side set; milled 225 Bimetal < 175 < 175 – 3–12 – – 2.5/10 side set; milled 300 Bimetal < 250 – – 3–10 – < 250 1.8–2.6 side set; milled 150 Bimetal < 100 – < 100 – < 100 < 50 4.3/6 side set; milled 150 Bimetal < 100 – < 100 – < 100 < 50 4.3 side set; milled 200 Bimetal < 150 – < 150 3–18 < 150 < 150 2.1– 4.3/6–12 side set; milled 150 Bimetal < 100 – – 3–10 – < 100 1.8–2.6/ 10-14 side set; milled 150 Bimetal < 100 – – 3–10 – < 100 1.8–2.6 side set; milled 225 Bimetal < 175 – – 3–10 – < 175 1.8–2.6 side set; milled 300 Bimetal < 250 – – 3–10 – < 250 1.8–2.6/ 10–14 side set; milled

0052 S 1411 DF

–

22.70

–

0055 S 1122 HF

–

–

93.80 *

0056 S 1222 VF 19.65

–

–

0060

S 611 DF

–

–

67.00 *

0060

S 611 DF

–

14.85

–

0066 S 3456 XF

–

22.00

–

0075

S 922 VF

–

13.60

–

0075

S 922 VF

–

–

61.30 *

0080 S 1122 VF 18.15

21.00 93.80 *

0240 S 1222 VF

–

22.70

–

(248)

(247)

(247)

* 25 pieces.

2/142

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).