Catalog FORMAT plus - EDE 2015 - 2017
Tailstock centres 562
Revolving lathe centre with extended moving tip
Design: Body and tip drop forged, hardened and ground. Moving tip is regrindable for several times and shank-mounted, with tip angle 60°. The precision bearing is protected from dirt and coolant by the special lip seal. The shank is ground, with hole for easy dismantling. The permissible load is reduced by the extended moving tip. With short projection length and low-vibration running. Application: For precision turning and roughing, can be universally used on all types of lathes. Particularly suitable for copy turning. The extended tip enables unobstructed movement of the sliding rests.
0005
0010
0015
0020
0025
Order No.
Morse taper
MK
1
2
3
4
5
3306
230.00
230.00
280.00
320.00
462.00
Size
101 70.5 34.5
102
106 95.5 58.5
108
110
Size A Size B Size D
mm mm mm mm mm mm mm
75 43 20
114.5
143.5
68.5
88.5
15
25
32
40
Measurement G
12.065
17.78
23.825
31.267
44.399
Size J Size K
9
10 34
12 47
14 53
16 65
27
Systems
3 Clamping
max. radial eccentricity max. workpiece weight
0.01
0.005
0.005
0.005
0.005 1200 3000
kg
80
140
400
500
Speed
max. min -1
7000
7000
5000
3800
(309)
Design: Body and tip drop forged, hardened and ground. Moving tip is carbide coated and shank-mounted, with tip angle 60°. The precision bearing is protected from dirt and coolant by the special lip seal. The shank is ground, with hole for easy dismantling. With short projection length, low-vibration running and jacknut. Application: For precision turning and roughing, can be universally used on all types of lathes. Revolving tailstock centres with jacknut and carbide insert
0005
0010
0015
0020
0025
Order No.
Morse taper MKMorse
2
3
4
5
6
3307
532.00 ◊
616.00 ◊
682.00 ◊
1070.00 ◊
1840.00 ◊
Size
102
106 79.5
108
110 129
114 152 105
Size A Size B Size C Size D
mm mm mm mm mm mm mm mm
65 45 11 20
102.5
60 14 25
70 14 32
90 18 40
18 50
Measurement G
17.78
23.825
31.265
44.399
63.348
Size K Size M
24 56
31 74
41 82
50.5 105
57.5 120 0.01 1800 2600
max. radial eccentricity max. workpiece weight Speed max.Morse taper
0.005
0.005
0.005
0.005 1000 3000
kg
120
360
500
7000
5000
3800
(309)
Design: Body and tip drop forged, hardened and ground. Moving tip is regrindable for several times and shank-mounted, with low 60° VL tip angle deflection. The precision bearing is protected from dirt and coolant by the special lip seal. The shank is ground, with hole for easy dismantling. High load capacity thanks to particularly strong construction and bearings, with jacknut. Application: Specially developed for use on NC machines, where there are especially tight requirements, also suitable on all other lathes. Revolving lathe centre with extended moving tip and jacknut for high loads
0005
0010
0015
Order No.
Morse taper
MK
4
5
6
3309
815.00
1265.00
2225.00
Size
484 122
485 150
486 180 120
Size A Size B Size D
mm mm mm mm mm mm mm
70 16
95 20
26
Measurement G
31.267
44.399
63.348
Size K Size M
44
59
77
100
125
155
max. radial eccentricity max. workpiece weight
0.005 1000 7000
0.005 2000 6000
0.005 3000 4800
kg
Speed
max. min -1
(309)
3/22
All stocked articles available within 24 hours by UPS Express.
All prices excluding VAT per piece (if not stated otherwise).
Made with FlippingBook