Catalog FORMAT plus - EDE 2015 - 2017
575
Tool holders and accessories
Clamping chuck for screw-in cutters
Design: DIN 69871, form AD/B, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: < 0.01 mm.
DIN 69871
Form AD/B
3559 3560
SK 40, Balancing quality: G2.5 25000 min -1
SK 50, Balancing quality: G6.3 12000 min -1
M
3 Clamping 3559 l 1 mm D 1 mm D 2 mm D 3 mm 4001 M6 101.00 m 69 6.5 10 13.0 4004 M6 110.00 m 94 6.5 10 13.0 4007 M6 128.00 m 119 6.5 10 13.0 4011 M8 98.00 69 8.5 13 23.0 4021 M8 110.00 94 8.5 13 23.0 4031 M8 128.00 119 8.5 13 25.0 4041 M10 98.00 69 10.5 18 23.0 4051 M10 110.00 94 10.5 18 28.0 4061 M10 128.00 119 10.5 18 32.0 4071 M12 98.00 69 12.5 21 24.0 4081 M12 110.00 94 12.5 21 31.0 4091 M12 128.00 119 12.5 21 33.0 4101 M16 101.00 69 16.5 29 34.0 4111 M16 110.00 94 16.5 29 34.0 4121 M16 128.00 119 16.5 29 36.0 4131 M16 136.00 144 16.5 29 36.0 (360) Order No. M 3560 l 1 mm D 1 mm D 2 mm D 3 mm 0071 M12 120.00 69 12.5 21 24.0 0081 M12 148.00 119 12.5 21 33.0 0091 M12 168.00 169 12.5 21 40.0 0101 M16 120.00 69 16.5 29 34.0 0111 M16 148.00 119 16.5 29 36.0 0121 M16 168.00 169 16.5 29 42.5 (360) Systems Order No. M
Extension for screw-in cutters
Design: Cylindrical shank to DIN 1835 B, with tapered design. Application: For holding milling tools with clamping thread.
3635
3635
D1 mm
D1 mm
Order No. 0201 0204 0207
M
D mm
D mm
A mm
L mm
Order No. 0210 0213 0216
M
D mm
D mm
A mm
L mm
16 16 20
74.30 86.40 74.30
M8 8.5 12.8 115 60 M8 8.5 12.8 160 100 M10 10.5 17.8 120 60
20 25 32
86.40 89.90 93.30
M10 10.5 17.8 160 100 M12 12.5 20.8 160 100 M16 17.0 28.8 160 100
(378)
(378)
Mini collet chuck ER
Design: These cylindrical collet chuck holder for collets to DIN 6499 (ER) have a lateral clamping surface, an extremely slim design and are used as boring bar milling cutters. The holder is supplied with standard clamping nut (mini nut). Application: For extension of tools for cylindrical shanks to DIN 1835 B+E as well as DIN 6535 HB. Slim design. Supplied: Collet chuck cpl. with clamping nut. Note: Tensioning nut Type M, see Ç 3/93, collets, see Ç 3/90.
3588
3588
Clamping range mm
Clamping range mm
Order No.
Collet
∅
l 1 l 2 D Collet ∅ l 1 l 2 D
Order No.
mm
mm
mm
mm
mm
mm
mm
mm
0001 0.5– 7.0 0002 0.5– 7.0 0003 0.5– 7.0 0004 0.5– 7.0 0006 0.5– 7.0 0011 0.5– 7.0 0013 0.5– 7.0 0036 0.5–10.0 0041 0.5–10.0
61.00 m 61.00 m 61.00 m 69.00 m
ER11 10 122 100 16 ER11 12 122 100 16 ER11 16 122 100 16 ER11 16 122 160 16 ER11 20 72 50 16 ER11 20 122 100 16 ER11 20 122 160 22 ER16 12 150 120 22 ER16 16 130 100 22
0046 0.5–10.0 0051 0.5–10.0 0056 0.5–10.0 0016 0.5–10.0 0021 0.5–10.0 0024 0.5–10.0 0026 0.5–13.0 0031 0.5–13.0
69.00 m 73.00 m 61.00 m
ER16 16 190 160 22 ER16 16 230 200 22 ER16 20 130 100 22 ER16 20 160 130 22 ER16 20 190 160 22 ER16 20 130 100 22 ER20 20 197 160 28 ER20 20 237 200 28
68.00 70.00
61.00 63.00
61.00 m
69.00 m 61.00 m 61.00 m
70.00 78.00
(360)
(360)
3/35
Articles marked ◊ are not held in stock, procurement is effected at short notice.
Not all items are available in every country.
Made with FlippingBook