Catalog FORMAT plus - EDE 2015 - 2017

Tool holders and accessories 576

Collet chuck ER

Design: DIN 69871, form AD/B, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: < 0.01 mm. Application: To mount tools with cylindrical shank to DIN 1835 B+E as well as DIN 6535 HB Supplied: Collet chuck complete with clamping nut.

DIN 69871

Form AD/B

l1

3561 3566

SK 40, Balancing quality: G2.5 25000 min -1

SK 50, balancing quality: G2.5 12000 min -1

Order No. D 1 mm l 1 mm 4011 0.5– 7.0 85.60 ER11 16 70 4021 0.5– 7.0 98.40 ER11 16 100 4031 0.5– 7.0 116.00 ER11 16 160 4041 0.5–10.0 85.60 ER16 22 70 4051 0.5–10.0 98.40 ER16 22 100 4061 0.5–10.0 116.00 ER16 22 160 4071 0.5–16.0 89.70 ER25 35 70 4081 0.5–16.0 98.40 ER25 35 100 4091 0.5–16.0 116.00 ER25 35 160 (364) Order No. Clamping range mm 3566 Collet D 1 mm l 1 mm 5041 0.5–10.0 97.20 ER16 22 70 5051 0.5–10.0 110.50 ER16 22 100 5061 0.5–10.0 121.50 ER16 22 160 5071 0.5–16.0 124.00 ER25 35 70 5081 0.5–16.0 110.50 ER25 35 100 5091 0.5–16.0 121.50 ER25 35 160 (364) Clamping range mm 3561 Collet

Systems

3 Clamping

Collet chuck type ER

Design: DIN 69871, form AD/B, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: < 0.01 mm. Balancing quality: G6.3 15000 min -1 . Application: For clamping tools with cylindrical shaft and lateral pulling

DIN 69871

Form AD/B

faces according to DIN 1835-B and DIN 6535 HB. Supplied: Collet chuck complete with tensioning nut.

3564 3565

SK 40

SK 50

Order No. Collet l 1 mm D 1 mm 0001 1.0–10.0 44.00 ER16 63 32 0004 1.0–10.0 48.00 ER16 100 32 0007 1.0–10.0 81.00 ER16 160 32 0010 0.5–16.0 44.00 ER25 60 42 0013 0.5–16.0 54.00 ER25 100 42 0016 0.5–16.0 81.00 ER25 160 42 0019 2.0–20.0 45.00 ER32 70 50 0022 2.0–20.0 54.00 ER32 100 50 0023 2.0–20.0 81.00 ER32 160 50 0025 3.0–26.0 47.00 ER40 80 63 0028 3.0–26.0 60.00 ER40 100 63 0031 3.0–26.0 87.00 ER40 160 63 (364) Order No. Clamping range mm 3565 Collet l 1 mm D 1 mm 0001 1.0–10.0 80.00 ER16 100 32 0004 1.0–10.0 108.00 ER16 160 32 0006 0.5–16.0 66.00 ER25 60 42 0007 0.5–16.0 80.00 ER25 100 42 0010 0.5–16.0 108.00 ER25 160 42 0013 2.0–20.0 68.00 ER32 70 50 0016 2.0–20.0 94.00 ER32 100 50 0019 2.0–20.0 108.00 ER32 160 50 0022 3.0–30.0 68.00 ER40 80 63 0023 3.0–30.0 94.00 ER40 100 63 0025 3.0–30.0 110.00 ER40 160 63 (364) Clamping range mm 3564

3/36

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).