Catalog FORMAT plus - EDE 2015 - 2017

587

Tool holders and accessories

CNC precision chuck for clockwise and counterclockwise rotation

Design: DIN 2080, form A, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Bore tolerance: H5. Concentricity: 0.02 mm. Balancing quality: G6.3 25000 min -1 . Application: For mounting tools with cylinder shaft and lateral driving surface according to DIN 1835-B and DIN 6535 HB. Supplied: CNC precision drill chuck with built-in clamping screw, from ∅ 25 mm with 2 clamping screws.

Form A

DIN 2080

3531

Systems D 2 mm l 1 mm 0002 0.3– 8.0 278.00 40 36 62 0005 0.5–13.0 233.50 40 50 83 0010 2.5–16.0 243.50 40 57 83 0015 0.5–13.0 288.50 50 50 100 0020 2.5–16.0 300.50 50 57 100 (325) Order No. Clamping range d 1 mm SK

3 Clamping

CNC short drill chuck AKL for clockwise and counterclockwise rotation

Design: DIN 2080, form A. Short design, guide elements of rigid design, hardened and ground wear parts ensure high concentricity and long life. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: < 0.03 mm. Max. permissible speed: 7000 min -1 . Balancing quality: pre-balanced up to 7000 min -1 at a residual imbalance of max. 40 gmm. Application: For drilling, countersinking, reaming, thread cutting and for simple finishing milling work. Can be used in machining centres, turning, drilling and milling machines. Supplied: Short drill chuck with hex spanner. Note: Higher speeds possible with special balancing.

DIN 2080

Form A

3480

Order No. SK l 1 mm D 2 mm 0007 1.0–16 240.10 40* 73 50 0009 1.0–16 298.50 50 77 50 (318) * With ring groove for automatic tool clamping. Clamping range d 1 mm

Face chuck, system Weldon

Design: Made of alloy case-hardened steel, with a core tensile strength of ca. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper accor- ding to DIN 254. Hardened 58 ± 2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Bore tolerance: H5. Concentricity: 0.01 mm. Balancing quality: G6.3 15000 min -1 . Application: For mounting tools with cylindrical shank and lateral driving surface. Supplied: Face chuck with clamping screw.

B JIS 6339 MAS/BT

Form AD/B

l1

d2

d1

Order No. BT l 1 mm D 2 mm 4006 6 34.00 40 50 25 6106 6 42.00 40 100 25 4008 8 33.00 40 50 28 6108 8 40.00 40 100 28 4010 10 33.00 40 63 35 6110 10 40.00 40 100 35 4012 12 33.00 40 63 42 6112 12 40.00 40 100 42 4014 14 33.00 40 63 44 6114 14 40.00 40 100 44 4016 16 33.00 40 63 48 6116 16 40.00 40 100 48 4018 18 33.00 40 63 50 (360) Order No. D 1 mm 3563 BT l 1 mm D 2 mm 6118 18 40.00 40 100 50 4020 20 33.00 40 63 52 6120 20 40.00 40 100 52 4025 25 37.00 40 90 65 4032 32 39.00 40 100 72 7006 6 59.00 m 50 63 25 7008 8 57.00 m 50 63 28 7010 10 57.00 m 50 70 35 7012 12 57.00 m 50 80 42 7016 16 57.00 m 50 80 48 7020 20 57.00 m 50 80 52 7025 25 62.00 m 50 100 65 7032 32 67.00 m 50 105 72 (360) D 1 mm 3563

3/47

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.