Catalog FORMAT plus - EDE 2015 - 2017

Tool holders and accessories 588

Precision face chuck system Weldon

Design: Made of alloy case-hardened steel, with a core tensile strength of ca. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper accor- ding to DIN 254. Hardened 60 –2 HRC. All functional surfaces machined. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Bore tolerance: H5. Concentricity: < 0.003 mm. Balancing quality: G2.5 22000 min -1 . Application: For mounting tools with cylindrical shank and lateral dri- ving surface. Supplied: Face chuck with clamping screw. Note: Suitable precision pulling bolts are found on Ç 3/101.

B JIS 6339 MAS/BT

Form AD/B

l1

d2

d1

Order No. BT l 1 mm D 2 mm 4006 6 74.00 40 50 25 6106 6 83.00 40 100 25 4008 8 74.00 40 50 28 6108 8 83.00 40 100 28 4010 10 74.00 40 63 35 6110 10 83.00 40 100 35 4012 12 74.00 40 63 42 6112 12 83.00 40 100 42 4014 14 74.00 40 63 44 4016 16 74.00 40 63 48 6116 16 90.00 40 100 48 4018 18 82.00 40 63 50 (394) Order No. D 1 mm 3232 BT l 1 mm D 2 mm 4020 20 82.00 40 63 52 6120 20 90.00 40 100 52 4025 25 105.00 40 90 59 4032 32 112.00 40 100 72 5006 6 121.00 50 63 25 5008 8 121.00 50 63 28 5010 10 125.00 50 70 35 5012 12 125.00 50 80 42 5016 16 125.00 50 80 48 5020 20 141.00 50 80 52 5025 25 141.00 50 100 65 5032 32 149.00 50 105 72 (394) D 1 mm 3232

Systems

3 Clamping

Clamping chuck for screw-in cutters

Design: JISB 6339 (MAS-BT), form AD/B, from alloy case-hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hard- ness depth of min. 0.5 mm. Taper to DIN 254. Hardened 58 ± 2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: < 0.01 mm. Balancing quality: G2.5 25000 min -1 . Application: For mounting milling heads with clamping thread.

B JIS 6339 MAS/BT

Form AD/B

l1

M

3570 3571

BT 40

BT 50

Order No. D 3 mm l 1 mm 3981 6 101.00 m 6.5 10 20.0 77 3991 6 110.00 m 6.5 10 20.0 102 4001 6 128.00 m 6.5 10 23.0 127 4011 8 98.00 8.5 13 23.0 77 4021 8 110.00 8.5 13 23.0 102 4031 8 128.00 8.5 13 25.0 127 4041 10 98.00 10.5 18 23.0 77 4051 10 110.00 10.5 18 28.0 102 4071 10 128.00 10.5 18 32.0 127 4081 12 98.00 12.5 21 24.0 77 4091 12 110.00 12.5 21 31.0 102 4101 12 128.00 12.5 21 33.0 127 4111 16 101.00 16.5 29 34.0 77 4121 16 110.00 16.5 29 34.0 102 4131 16 128.00 16.5 29 36.0 127 4141 16 136.00 16.5 29 40.0 152 (360) Order No. M 3571 D 1 mm D 2 mm D 3 mm l 1 mm 5081 12 120.00 12.5 21 24.0 89 5091 12 148.00 12.5 21 33.0 138 5101 12 168.00 12.5 21 40.0 188 5111 16 120.00 16.5 29 34.0 89 5121 16 148.00 16.5 29 36.0 138 5131 16 168.00 16.5 29 42.5 188 (360) M 3570 D 1 mm D 2 mm

3/48

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).