Catalog FORMAT plus - EDE 2015 - 2017

589

Tool holders and accessories

Extension for screw-in cutters

Design: Cylindrical shank to DIN 1835 B, with tapered design. Application: For holding milling tools with clamping thread.

DIN 1835 B

3635

3635

D1 mm

D1 mm

Order No. 0201 0204 0207

M

D mm

D mm

A mm

L mm

Order No. 0210 0213 0216

M

D mm

D mm

A mm

L mm

16 16 20

74.30 86.40 74.30

M8 8.5 12.8 115 60 M8 8.5 12.8 160 100 M10 10.5 17.8 120 60

20 25 32

86.40 89.90 93.30

M10 10.5 17.8 160 100 M12 12.5 20.8 160 100 M16 17.0 28.8 160 100

(378)

(378)

3 Clamping Design: DIN JISB 6339 (MAS-BT), form AD/B, from alloy case- hardened steel, with a core tensile strength of approx. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Taper to DIN 254. Hardened 58 ±2 HRC. Taper angle: Tolerance AT3. Taper surface roughness: Ra < 0.001 mm. Concentricity: < 0.01 mm. Balancing quality: G6.3 15000 min -1 . Application: For mounting tools with cylindrical shank in collets according to DIN 6499 (ER). Supplied: Collet chuck cpl. with clamping chuck. Order No. Clamping range mm 3580 BT Collet D 1 mm l 1 mm 4160 1–10 43.00 40 ER16 32 63 4161 1–10 49.00 40 ER16 32 100 4162 1–10 82.00 40 ER16 32 160 4250 1–16 43.00 40 ER25 42 60 4251 1–16 54.00 40 ER25 42 100 4252 1–16 89.00 40 ER25 42 160 4320 2–20 45.00 40 ER32 50 70 4321 2–20 54.00 40 ER32 50 100 4322 2–20 91.00 40 ER32 50 160 4400 3–26 48.00 40 ER40 63 80 (364) Order No. Clamping range mm 3580 BT Collet D 1 mm l 1 mm 4401 3–26 60.00 40 ER40 63 100 4402 3–26 96.00 40 ER40 63 160 5160 1–10 72.00 50 ER16 32 70 5161 1–10 89.00 50 ER16 32 100 5250 1–16 72.00 50 ER25 42 70 5251 1–16 89.00 50 ER25 42 100 5320 2–20 76.00 50 ER32 50 70 5321 2–20 104.00 50 ER32 50 100 5400 3–26 76.00 50 ER40 63 80 5401 3–26 108.00 50 ER40 63 100 (364) Collet chuck type ER B JIS 6339 MAS/BT Form AD/B l1 Systems

Precision collet chuck Type ER

Design: JISB 6339 (MAS-BT), form AD/B, precision balanced. Made of alloy case-hardened steel, with a core tensile strength of ca. 950 N/mm 2 and a hardness depth of min. 0.5 mm. Hardened 60 -2 HRC. All functional surfaces machined. Taper tolerance: AT3. Concentricity: < 0.003 mm. Balancing quality: G2.5 22000 min -1 . Application: For clamping tools with cylindrical shank in collets according to DIN 6499. Supplied: Collet chuck cpl. with clamping nut (balanced, with anti- friction coating for increased clamping force). Note: Dimension I 2 specifies the maximum insertion depth for tools.

B JIS 6339 MAS/BT

Form AD/B

l1

l2

Order No. D 1 mm l 1 mm 4160 0.5–10.0 75.00 40 ER16 28 70 4161 0.5–10.0 81.00 40 ER16 28 100 4162 0.5–10.0 105.00 40 ER16 28 160 4250 1.0–16.0 75.00 40 ER25 42 70 4251 1.0–16.0 89.00 40 ER25 42 100 4252 1.0–16.0 134.00 40 ER25 42 160 4320 1.5–20.0 78.00 40 ER32 50 70 4321 1.5–20.0 92.00 40 ER32 50 100 4323 1.5–20.0 136.00 40 ER32 50 160 4400 2.5–26.0 89.00 40 ER40 63 70 4401 2.5–26.0 105.00 40 ER40 63 100 4402 2.5–26.0 149.00 40 ER40 63 160 (394) Order No. Clamping range d 1 mm 3234 BT Collet D 1 mm l 1 mm 5160 0.5–10.0 125.00 50 ER16 28 70 5161 0.5–10.0 142.00 50 ER16 28 100 5162 0.5–10.0 174.00 50 ER16 28 160 5250 1.0–16.0 136.00 50 ER25 42 70 5251 1.0–16.0 142.00 50 ER25 42 100 5252 1.0–16.0 187.00 50 ER25 42 160 5320 1.5–20.0 136.00 50 ER32 50 70 5321 1.5–20.0 142.00 50 ER32 50 100 5322 1.5–20.0 201.00 50 ER32 50 160 5400 2.5–26.0 149.00 50 ER40 63 80 5401 2.5–26.0 155.00 50 ER40 63 100 5402 2.5–26.0 213.00 50 ER40 63 160 (394) Clamping range d 1 mm 3234 BT Collet

3/49

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.