Catalog FORMAT plus - EDE 2015 - 2017

738

Digital pocket calipers

Protection class overview

First Digit

Importance of protection of operating equipment

Second Water protection Digit 0 Unprotected 1

0 1

Unprotected

Protection against penetration by solid foreign bodies with a diameter larger than 50 mm Protection against penetration by solid foreign bodies with a diameter larger than 12.5 mm Protection against penetration by solid foreign bodies with a diameter larger than 2.5 mm Protection against penetration by solid foreign bodies with a diameter larger than 1 mm

Protection against vertical drips

2 3 4 5 6 7 8

Protection against dripping water with 15° incline Protection against water spray Protection against splashing Protection against jets of water Protection against strong jets of water Protection against temporary submersion Protection against prolonged submersion

2

3

4

5 6

Protected against dust

Dustproof Example: Measuring instrument with protection IP 67: (IP – Internati- onal Protection). This is a dustproof measuring instrument which can also be submerged for brief periods of time.

O m

Digital pocket calipers TWIN-Cal

Design: Made of stainless steel, hardened, with drive wheel. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible. Application: For inside, outside, depth and step measurements. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

ISO 13385-1

INOX IP 40 Absolute function

USB

Certificate

Digimatic

∅ 1,6 mm f

Equipment

4 Measuring

With round depth gauge

4021

Measurement range mm

Order No. 2160 3200 3300

Design

Reading

Jaw length mm

150 200 300

122.00 153.00 236.00

With round depth gauge

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

40 50 64

With rectangular depth gauge With rectangular depth gauge

(495)

Digital pocket calipers

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw, digit height of LCD 7.5 mm, inductive measurement system. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position, ± pre-set function (setting a numerical value). Application: For inner, outer, depth and step measurements. Note: Replacement battery (Order No. 4027 2032, Ç 4/12).

DIN 862

Absolute function

INOX

IP 67

Certificate

∅ 1,5 mm

4023

Measurement range mm

Order No. 1150 1151 1200 1300

Design

Reading

Jaw length mm

150 150 200 300

145.00 145.00 205.00 259.00

With round depth gauge

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

40 40 50 65

With rectangular depth gauge With rectangular depth gauge

Without depth gauge

(404)

4/10

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).