Catalog FORMAT plus - EDE 2015 - 2017

739

Digital pocket calipers/accessories

Digital pocket calipers TWIN-Cal

Design: Made of stainless steel, hardened, with drive wheel. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible. Application: For inside, outside, depth and step measurements. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

ISO 13385-1

INOX IP 67 Absolute function

USB

Certificate

Digimatic

∅ 1,6 mm

4024

Measurement range mm

Order No. 0011 0012 1151 1201 1301

Design

Reading

Jaw length mm

150 150

159.00 159.00 159.00 222.00 305.00

With round depth gauge

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

40 40 40 50 64

With rectangular depth gauge

150* 200* 300*

With round depth gauge

With rectangular depth gauge With rectangular depth gauge

Equipment

4 Measuring

(495)

* With drive wheel.

Design: Accessories set made of steel, burnished black. For digital caliper gauge with a beak length of 40 mm. Supplied in a wooden box. Application: For measuring hole distances, grooves and recesses. Measuring tool set extensions

4028

Set contents

Order No. 0005

Pair of measuring inserts with disc, disc ∅ 6, 10 and 12.5 mm Pair of measuring inserts with 60° taper, ∅ 9 and 12.5 mm Pair of measuring inserts with cylindrical measuring faces 1.5 mm Measuring insert base right and left Hexagonal wrench

164.00

For measuring hole distances

For measuring notches

(404)

For measuring notches

For measuring hole distances

For measuring distances

Tiefenmessbrücke Design: Made of stainless steel, with clamping screw. Application: For mounting onto pocket calipers. For measuring depths, holes, grooves, sections etc. Note: Suitable for all pocket calipers up to measuring range 200 mm. D pth gauge bridge TD

INOX

4024

4014

Dimensions mm

Order No. 0075 1001

75 x 7 75 x 6

19.30

–

–

33.00

(403)

(495)

Data cable

Application: For data transmission from digital measuring equipment to PC or printer without complex interfaces.

opto RS232

USB Digimatic

4025

Design

Order No. 0002

Interface

Length m

79.20

Data cable SIMPLEX

Opto RS 232 2

0003 Data cable USB incl. software 75.30

USB

2 2

0004

Data cable Digimatic

67.70

Digimatic

(404)

... 0002

... 0003

... 0004

4/11

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.