Catalog FORMAT plus - EDE 2015 - 2017

750

Depth gauge calipers/digital depth gauge calipers

Design: Made of stainless steel, hardened, reading parts and vernier matt chrome-plated, high-precision laser-made graduations on both sides, with double-sided, stepped measuring bar for repositioning, with locking screw. Supplied in plastic case. Depth gauge calipers with double-sided stepped measuring rod DIN 862 INOX

4079

Measure- ment range mm

Order No.

Reading below mm

Bridge length mm

Cross-section of the measuring bar mm

0200 0300 0205 0305

200 300 200 300

88.00 (412) 102.50 (412) 86.10 (411) 111.00 (411)

0.05 100 0.05 100 0.02 100 0.02 100

8 x 3 12 x 4 8 x 3 12 x 4

Design: Made of stainless steel, hardened. Scale background matt chrome-plated, main scale slightly recessed to protect against wear, with locking screw. Supplied in plastic case. Note: Measuring bridge (Order No. 4081, Ç 4/23). Depth gauge calipers with rotary stop plate

DIN 862

INOX Certificate

4079

Equipment

4 Measuring

Measurement range mm

Order No. 2150 2250

Reading below mm

Bridge length mm

Cross-section of the measuring bar mm

150 250

259.00 292.00

0.05 0.05

130 130

12 x 4 12 x 4

(495)

m

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD 6 mm, with data output Opto RS 232. Supplied with battery CR 357, 1.5 V, in a wooden box. Function: Switch-on and off, mm/inch-conversion, reset (zeroing) possible in any position, hold function (measurement memory). Note: Replacement battery (Order No. 4027 0357, Ç 4/12). Data cable (Order No. 4025 0002, Ç 4/11). Digital depth gauge calipers with straight measuring rod DIN 862 INOX Prüf- zertifikat Certificate

opto RS232

4078

Measurement range mm

Order No. 1200 1300 1500 2000

Reading

Bridge length mm

Cross-section of the measuring bar mm

200 300 500 1000

66.90

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 150 150 250

14.5 x 4 14.5 x 4 14.5 x 4 14.5 x 4

110.00 190.00 549.50

(400)

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw, digit height of LCD 7.5 mm, inductive mea- surement system, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied with battery CR 2032, 3 V, in a wooden box. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position, ± pre-set function (setting a numerical value). Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable USB (Order No. 4025 0003, Ç 4/11). Data cable Digimatic (Order No. 4025 0004, Ç 4/11). Data cable RS 232 available on request. Digital depth gauge calipers with straight measuring rod DIN 862 Digimatic

INOX Absolute

RS232

USB

function Certificate

4080

Measurement range mm

Order No. 1200 1300 1500 2000

Reading

Bridge length mm

Cross-section of the measuring bar mm

200 300 500 1000

281.00 326.00 422.50 1199.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 150 150 250

12 x 4 12 x 4 12 x 4 30 x 7

(404)

4/22

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).