Catalog FORMAT plus - EDE 2015 - 2017

751

Digital depth gauge calipers

m

Digital depth gauge calipers with straight measuring rod

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD 8 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch-conversion, ABS (absolute and relative measurements), zero setting possible in any position. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable (Order No. 4025 0002, Ç 4/11).

DIN 862

opto RS232

INOX IP 54 Absolute function

4098

Measurement range mm

Order No. 0200 0300 0500

Reading

Bridge length mm

Cross-section of the measuring bar mm

200 300 500

89.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 150 150

12 x 4 12 x 4 12 x 4

154.00 287.50

(435)

m

Digital depth gauge calipers TWIN-Cal with straight measuring rod

Design: Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

ISO 13385-1

opto RS232

INOX IP 67 Absolute function

Certificate

Equipment

4 Measuring

4081

Measurement range mm

Order No. 0201 0251 0301 0501

Reading

Bridge length mm

Cross-section of the measuring bar mm

200 250 300 500

417.00 438.00 462.00 571.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 100 150 150

15 x 4 15 x 4 15 x 4 15 x 4

(495)

Mountable measuring bridge

Factory standard

Design: Supplied with mounting means, in transport packaging

4081

Length mm

Order No. 0001 0003 0005

Width mm

Height mm

200 300 400

215.00 230.00 238.00

8 8 8

10 16 16

(495)

m

Digital depth gauge calipers with double-sided stepped measuring rod

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD 6 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch-conversion, ABS (absolute and relative measurements), zero setting possible in any position. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable (Order No. 4025 0002, Ç 4/11).

DIN 862

opto RS232

Absolute function

INOX

IP 54

4097

Measurement range mm

Order No. 0300

Reading

Bridge length mm

Cross-section of the measuring bar mm

300

162.00

0.01 mm (0.0005 inch)

150

12 x 4

(435)

4/23

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.