Catalog FORMAT plus - EDE 2015 - 2017

752

Digital depth gauge calipers

m

Digital depth gauge calipers TWIN-Cal with double-sided stepped measuring rod

Design: Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

ISO 13385-1

opto RS232

Absolute function

INOX

IP 67

Certificate

4082

Measurement range mm

Order No. 0301

Reading

Bridge length mm

Cross-section of the measuring bar mm

300

667.00

0.01 mm (0.0005 inch)

150

15 x 4

(495)

m

Digital depth gauge calipers with stepped measuring rod

Equipment

4 Measuring

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD 8 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch-conversion, ABS (absolute and relative measurements), zero setting possible in any position. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable (Order No. 4025 0002, Ç 4/11).

opto RS232

DIN 862

Absolute function

INOX

IP 54

4096

Measurement range mm

Order No. 0300 0500

Reading

Bridge length mm

Cross-section of the measuring bar mm

300 500

149.00 282.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

150 150

12 x 4 12 x 4

(435)

m

Digital depth gauge calipers TWIN-Cal with stepped measuring rod

Design: Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protec- tion remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock for setting zero positi- on, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

opto RS232

ISO 13385-1

Absolute function

INOX

IP 67

Certificate

4084

Measurement range mm

Order No. 0301 0501

Reading

Bridge length mm

Cross-section of the measuring bar mm

300 500

534.00 629.00

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

150 150

15 x 4 15 x 4

(495)

4/24

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).