Catalog FORMAT plus - EDE 2015 - 2017

753

Digital depth gauge calipers

m

Depth gauge calipers TWIN-Cal with rotary stop plate

Design: Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

ISO 13385-1

INOX

IP 67

opto RS232

Absolute function

Certificate

4083

Measurement range mm

Order No. 0251

Reading

Bridge length mm

Cross-section of the measuring bar mm

250

475.00

0.01 mm (0.0005 inch)

150

15 x 4

(495)

Design: Made of stainless steel, hardened, with locking screw, digit height of LCD 7.5 mm, inductive measurement system, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied with plate measuring insert ∅ 7.5 x 1 mm, measuring insert ∅ 4 mm, flat and spherical, battery CR 2032, 3 V, in a wooden box. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position, ± pre-set function (setting a numerical value). Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable USB (Order No. 4025 0003, Ç 4/11). Data cable Digimatic (Order No. 4025 0004, Ç 4/11). Data cable RS 232 available on request. Digital depth gauge calipers with plate measuring insert

DIN 862

Absolute function

INOX

Equipment

4 Measuring

RS232

USB

Digimatic

4084

Measurement range mm

Order No. 0100

Reading

Bridge length mm

Cross-section of the measuring bar mm

100

509.00

0.01 mm (0.0005 inch)

85

16 x 3

(404)

m

Digital depth gauge calipers with measuring pin

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD 8 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch-conversion, ABS (absolute and relative measurements), zero setting possible in any position. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable (Order No. 4025 0002, Ç 4/11).

DIN 862

opto RS232

INOX

IP 54

4097

Measurement range mm

Order No. 0025

Reading

Bridge length mm

Measuring pin ∅ mm

25

66.00

0.01 mm (0.0005 inch)

50

1.5

(435)

m

Digital depth gauge calipers TWIN-Cal with measuring pin

Design: Made of stainless steel, hardened. Retrofitted for wireless data transfer with transmitter module TLC TWIN as well as receiver TWIN station. Range between instrument and receiver is 12 m. Digit height of LCD 11 mm. Automatic saving mode after 10 minutes. Switch-off after 2 hours. Upgradeable to interface port with USB or Digimatic, protection remains with cable connection. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position. Unique extension for data transmission with TWIN connection (TLC) is possible. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Cable TLC-USB (Order No. 4025 0015, Ç 4/12). Cable TLC-DIGIMATIC (Order No. 4025 0020, Ç 4/12). Transmitter module TLC-TWIN (Order No. 4025 0025, Ç 4/12). Receiver TWIN station available upon request.

ISO 13385-1

INOX

IP 67

opto RS232

Absolute function

Certificate

4085

Measurement range mm

Order No. 0002

Reading

Bridge length mm

Measuring pin ∅ mm

25

332.00

0.01 mm (0.0005 inch)

50

2

(495)

4/25

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.