Catalog FORMAT plus - EDE 2015 - 2017

768

Inside micrometers

The Abbe principle The Abbe principle requires that, during length measurement, the dis- tance to be measured on the test object and the distance to be com- pared on the measuring standard are arranged aligned (in parallel) in

the direction of measurement. In this way, measurement deviations are avoided or become negligible.

Design: Measuring faces for instruments from 3.5 to 12 mm, hardened steel, from 11 to 100 mm TiN-coated, from 100 to 300 mm carbide-tipped. Metric scale display. Supplied in transport packaging, from measurement range 200 mm in a wooden case and with an extension of 150 mm. Self-centring and self-aligning inside micrometer. The high precision measuring thread ground into the taper and the layout of the three measuring bolts make the IMICRO Inside micrometer IMICRO with scale display

DIN 863

Certificate

the only inside micrometer in the world which uses the 3 line contact of the Abbe principle on the test object (thus avoiding tilt errors). High measurement reliability is guaranteed even with very large measurement depths. Note: Extensions available upon request.

TiN

Unique taper measuring system

4162

Measurement range mm 3.5– 4.0 4.0– 4.5 4.5– 5.5 5.5– 6.5 6.0– 8.0 8.0– 10.0 10.0– 12.0 11.0– 14.0 14.0– 17.0 17.0– 20.0 20.0– 25.0 25.0– 30.0 30.0– 35.0 35.0– 40.0 40.0– 50.0 50.0– 60.0 60.0– 70.0 70.0– 80.0 80.0– 90.0 90.0–100.0 100.0–125.0 125.0–150.0 150.0–175.0 175.0–200.0 200.0–225.0 225.0–250.0 250.0–275.0 275.0–300.0

Order No.

Reading

Error limit

A

B

C

mm

µm

mm 2.0 2.0 2.0 2.0 2.5 2.5 2.5 3.5 3.5 3.5 7.0 7.0 7.0 7.0 11.0 11.0 11.0 11.0 11.0 11.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0 26.0

mm 1.5 1.5 1.5 1.5 2.5 2.5 2.5 4.0 4.0 4.0 7.0 7.0 7.0 7.0 12.0 12.0 12.0 12.0 12.0 12.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0 18.0

mm

TiN

0001 0003 0005 0007 0009 0011 0013 0015 0017 0019 0021 0023 0025 0027 0029 0031 0033 0035 0037 0039 0041 0043 0045 0047 0049 0051 0053 0055

642.00 642.00 645.00 645.00 385.00 388.00 389.00 441.00 445.00 448.00 484.00 493.00 499.00 503.00 596.00 607.00 618.00 626.00 638.00 661.00 1062.00 1056.00 1072.00 1103.00 1476.00 1492.00 1553.00 1600.00

0.001 0.001 0.001 0.001 0.001 0.001 0.001 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.005 0.010 0.010 0.010 0.010 0.010 0.010 0.010 0.010

4 4 4 4 4 4 4 4 4 4 4 4 4 4 5 5 5 5 5 5 6 6 7 7 8 8 8 8

20 20 25 25 52 52 52 77 77 77 78 78 78 78 84 84 84 84 84 84 81 81 81 81 81 81 81 81

Equipment

4 Measuring

(495)

Inside micrometer set IMICRO with scale display

Design: Supplied with adjustment rings and screwdriver, in a plastic case. Note: Further set combinations available upon request.

TiN

4176

Measurement range mm

Order No.

Single device

Adjusting ring

Extension

mm

mm

mm

TiN

0001 0003 0005 0007 0009

3.5– 6.5 6.0– 12.0 11.0– 20.0 20.0– 40.0 40.0–100.0

2571.00 1386.00 1594.00 2295.00 4766.00

3.5–4; 4–4,5; 4.5–5,5; 5.5–6,5

4; 5.5 8; 10 11; 17 25; 35

–

6–8; 8–10; 10–12

100 150 150 150

11–14; 14–17; 17–20

20–25; 25–30; 30–35; 35–40

40–50; 50–60; 60–70; 70–80; 80–90; 90–100

50; 70; 90

(495)

4/40

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).