Catalog FORMAT plus - EDE 2015 - 2017

769

Digital inside micrometers

Digital three point inside micrometer ALESOMETER capa µ system DIN 863 IP 54 Certificate opto RS232

Design: Inside micrometer with 3-line contact, up to 10 mm measu- rement range with measuring bolts made of hardened steel, from 10 mm measurement range carbide-tipped. Digit height of the LCD 7 mm. Supplied with battery CR 2032, 3 V, in plastic case, over measuring range 100 mm in wooden case. Function: mm/inch-conversion, automatic switch-off after 10 minutes, display setting is retained, reset (zeroing) possible in any position, blocking of display. Data output Opto RS 232. Application: With the exception of instruments in the measurement range 6–10 mm, all these devices are suitable for measuring through- hole bores, also blind hole bores and short centring shoulders. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable Opto RS 232 (Order No. 4025 0005, Ç 4/12). Other sizes available on request.

4166

4166

Measure- ment range mm 6.0– 8.0 8.0–10.0 10.0–12.5 12.5–15.0 15.0–17.5 17.5–20.0 20.0–25.0 25.0–30.0 30.0–35.0 35.0–40.0

Measure- ment range mm

Order No.

Reading

Error limit µm

A

B

C

Order No.

Reading

Error limit µm

A

B

C

mm

mm

mm

mm

mm

mm

mm

mm

0001 0003 0005 0007 0009 0011 0013 0015 0017 0019

1060.00 1060.00 1109.00 1109.00 1109.00 1109.00 1176.00 1176.00 1176.00 1176.00

0.001 4 1.2 3.0 55.0 0.001 4 1.2 3.0 55.0 0.001 4 0.3 6.5 65.0 0.001 4 0.3 6.5 65.0 0.001 4 0.3 6.8 65.0 0.001 4 0.3 6.8 95.0 0.001 4 0.3 8.5 100.0 0.001 4 0.3 8.5 100.0 0.001 4 0.3 8.5 100.0 0.001 4 0.3 8.5 100.0

0021 0023 0025 0027 0029

40.0– 50.0 1315.00 50.0– 60.0 1315.00 60.0– 70.0 1315.00 70.0– 85.0 1368.00 85.0–100.0 1368.00

0.001 5 0.3 14.5 140.0 0.001 5 0.3 14.5 140.0 0.001 5 0.3 14.5 140.0 0.001 5 0.3 14.5 140.0 0.001 5 0.3 14.5 140.0 0.001 6 0.3 30.0 175.0 0.001 6 0.3 30.0 175.0 0.001 7 0.3 30.0 175.0 0.001 7 0.3 30.0 175.0

Equipment

4 Measuring

0031 100.0–125.0 1828.00 0033 125.0–150.0 1934.00 0035 150.0–175.0 2049.00 0037 175.0–200.0 2187.00

(495)

(495)

Digital three point inside micrometer set ALESOMETER capa µ system

Design: Supplied in plastic case, over measuring range 100 mm in wooden case. Note: Further set combinations > 100 mm available upon request.

4166

Measurement range mm

Order No. 0060

Set contents

6– 10

1383.00

2 measuring heads, 6–8 mm and 8–10 mm 1 spacer

1 measuring element 1 adjusting ring, 8 mm

0063

10– 20

2317.00

4 measuring heads, 10–12.5 mm, 12.5–15 mm, 15–17.5 mm and 17.5–20 mm 1 spacer 1 measuring element 2 adjusting rings, 12.5 and 17.5 mm 4 measuring heads, 20–25 mm, 25–30 mm, 30–35 mm and 35–40 mm 1 spacer 1 measuring element 2 adjusting rings, 25 and 35 mm 5 measuring heads, 40–50 mm, 50–60 mm, 60–70 mm, 70-85 mm and 85–100 mm 1 spacer 1 measuring element 3 adjusting rings, 45, 60 and 85 mm

0066

20– 40

2448.00

0069

40–100

4199.00

(495)

4/41

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.