Catalog FORMAT plus - EDE 2015 - 2017

770

Digital inside micrometers

Digital three point inside micrometer IMICRO capa µ system

Design: Measuring faces made of hardened steel for measurement range 3.5–12 mm, from 11–100 mm TiN-coated, measurement range 100–300 mm carbide-tipped. Digit height of the LCD 7 mm. Supplied with battery CR 2032, 3 V, in plastic case. Function: mm/inch-conversion, automatic switch-off after 10 minutes, display setting is retained, reset (zeroing) possible in any position, blocking of display. Data output Opto RS 232. Note: Replacement battery (Order No. 4027 2032, Ç 4/12). Data cable Opto RS 232 (Order No. 4025 0005, Ç 4/12). Other sizes available on request.

TESA calibration certificate

opto RS232

DIN 863

IP 54

4168

4168

Measure- ment range mm 3.5– 4.0 4.0– 4.5 4.5– 5.5 5.5– 6.5 6.0– 8.0 8.0–10.0 10.0–12.0 11.0–14.0 14.0–17.0 17.0–20.0 20.0–25.0 25.0–30.0

Measure- ment range mm 30.0– 35.0 35.0– 40.0 40.0– 50.0 50.0– 60.0 60.0– 70.0 70.0– 80.0 80.0– 90.0 90.0–100.0

Order No.

Reading

Error limit µm

A

B

C

Order No.

Reading

Error limit µm

A

B

C

mm

mm

mm

mm

mm

mm

mm

mm

0001 0003 0005 0007 0009 0011 0013 0015 0017 0019 0021 0023

1292.00 1292.00 1292.00 1292.00 1044.00 1052.00 1062.00 1066.00 1072.00 1075.00 1084.00 1096.00

0.001 4 2.0 1.5 20.0 0.001 4 2.0 1.5 20.0 0.001 4 2.0 1.5 25.0 0.001 4 2.0 1.5 25.0 0.001 4 2.5 2.5 79.0 0.001 4 2.5 2.5 79.0 0.001 4 2.5 2.5 79.0 0.001 4 3.5 4.0 93.0 0.001 4 3.5 4.0 93.0 0.001 4 3.5 4.0 93.0 0.001 4 7.0 7.0 91.0 0.001 4 7.0 7.0 91.0

0025 0027 0029 0031 0033 0035 0037 0039

1112.00 1124.00 1164.00 1183.00 1217.00 1241.00 1267.00 1292.00

0.001 4 7.0 7.0 91.0 0.001 4 7.0 7.0 91.0 0.001 5 11.0 12.0 104.0 0.001 5 11.0 12.0 104.0 0.001 5 11.0 12.0 104.0 0.001 5 11.0 12.0 104.0 0.001 5 11.0 12.0 104.0 0.001 5 11.0 12.0 104.0

Equipment

4 Measuring

0041 100.0–125.0 0043 125.0–150.0 0045 150.0–175.0 0047 175.0–200.0

1739.00 ◊ 0.001 6 26.0 18.0 100.0 1757.00 ◊ 0.001 6 26.0 18.0 100.0 1978.00 ◊ 0.001 7 26.0 18.0 100.0 1996.00 ◊ 0.001 7 26.0 18.0 100.0 (495)

(495)

Digital three point inside micrometer set IMICRO capa µ system

Design: Supplied in plastic case. Note: Further set combinations > 100 mm available upon request.

4168

Measurement range mm

Order No. 0060

Set contents

6– 12

3182.00

3 individual devices, 6–8 mm, 8–10 mm and 10–12 mm 2 adjusting rings, 8 and 10 mm 1 extension, 100 mm 3 individual devices, 11–14 mm, 14–17 mm and 17–20 mm 2 adjusting rings, 11 and 17 mm 1 extension, 150 mm 4 individual devices, 20–25 mm, 25–30 mm, 30-35 mm and 35–40 mm 2 adjusting rings, 25 and 35 mm 1 extension, 150 mm

0063

11– 20

3285.00

0066

20– 40

4488.00

0069

40–100

8023.00

6 individual devices, 40–50 mm, 50–60 mm, 60–70 mm, 70–80 mm, 80–90 mm and 90–100 mm 3 adjusting rings, 50, 70 and 90 mm 1 extension, 150 mm

(495)

4/42

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).