Catalog FORMAT plus - EDE 2015 - 2017

947

Test and measuring devices

Digital multimeter

Design: Casing made of impact-resistant plastic. Application: For the measuring of DC and AC voltages as well as current and resistance, frequency and capacity, continuity and diode testing. MM 1 Supplied with protective rubber case, compact protective bag, dual-insulated safety measurement lines and batteries. MM 2 Supplied with protective rubber case, compact protective bag, dual-insulated safety measurement lines and batteries. MM 3 Supplied with protective rubber case, compact protective bag, dual-insulated safety measurement lines and batteries. MM 4 Supplied with AC current pliers attachment, measuring probes, compact protective bag, dual-insulated safety measurement lines and batteries. MM 7-1 Automatic voltage function for automatic identification of DC/AC voltage, low input impedance (LoZ) for the suppression of capacitive/inductive interspersed voltages. Supplied with wire temperature sensor with adapter, rubber protective case, compact protective bag, dual-insulated safety measurement lines as well as batteries. 5587 0005 5587 0050 5587 0100 5587 0251 5584 0005

IP 30

5 Hand Tools

5584 0005

5587 0005

5587 0050

5587 0100

5587 0251

CAT III

CAT III

CAT III

CAT III

CAT IV

0005 MM 1 76.00

0005 MM 2

0050 MM 3

0100 MM 4

0251

Order No.

Model

MM 7-1

5584 5587 DC voltage AC voltage

–

–

–

–

–

90.30

114.00

130.80

202.30

0.1 mV–600 V 1 mV–600 V 0.1 µA–3.2 mA

0.1 mV–1000 V 0.1 mV–750 V

0.1 mV–600 V 0.1 mV–600 V 0.1 µA–20 A 0.1 µA–20 A

1 mV–600 V 1 mV–600 V

10 µV–1000 V 10 µV–1000 V

Direct current

0.1 µA–20 A 0.1 µA–20 A

–

10 µA–10 A 10 µA–10 A

Alternating current

–

0.1 A–300 A

Resistance

0.1 Ohm–32 MOhm 0.1 Ohm–20 MOhm 0.1 Ohm–20 MOhm 0.1 Ohm–42 MOhm 0.1 Ohm–40 MOhm

Continuity/diodes

yes/yes

yes/yes

yes/yes

yes/yes

yes/yes

Frequency

– – – –

– – – –

1 Hz–200 kHz 1 pF–200 µF

– – –

0.01 Hz–100 kHz

Capacity

1 nF–10 mF

Temperature Pliers opening

– –

–40 °C to +400 °C

30mm

–

Measurement category Measuring procedure

CAT III 600 V

CAT III 600 V

CAT III 300 V

CAT III 300 V

CAT IV 600 V

RMS IP 30

RMS IP 30

RMS IP 30

RMS IP 30

TRUE RMS

Protection type

IP 30

Batteries

2 x micro AAA/LR03 1 x 6LR61 block battery 1 x 6LR61 block battery 2 x micro AAA/LR03 1 x 6LR61 block battery

Display

LCD

LCD

LCD

LCD

LCD

(514)

The measurement categories CAT I to CAT IV CAT I valid for measurements performed on circuits not directly connected to the network (e.g. specially protected devices) CAT Il Valid for measurements in building installation (e.g. distribution, wiring, sockets, switches) CAT III Valid for measurements in the building installation (e.g. distribution, wiring, sockets, switches) CAT IV Valid for measurements at the source of low-voltage installations (e.g. counters, main terminal, primary excess current protection devices).

Y 1 distribution Y 2 counter Y 3 outside trans- former station Y 4 underground cables

5/77

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.