html - Catalog FORMAT plus - 2017 - 2018

Screw hole punches 1279

Screw hole punch

Design: Made of special tool steel. Activated via spanner or hydraulic tools. Supplied incl. die, stamp, pressure screw. Application: For punching holes in various materials such as stainless steel, copper, brass, aluminium and sheet iron as well as plastic. Particularly suitable for working in difficult to reach areas, such as switching cabinets, instruments panels, etc. Note: Lubricate pressure screw and die before working. The predrilled hole must be ca. 1 mm larger than the pressure screw.

7116 7117

Without ball bearings.

7116

7117

With ball bearing.

7117

7116

Punch diameter mm

Order No. 0012 0015 0016 0018 0020 0021 0022 0023 0025 0028 0029 0030 0032 0035 0037 0038 0040 0047 0051 0054 0060

Punch diameter PG mm

Screw size mm

Sheet thickness max. mm

12.7 15.2 16.0 18.6 20.0 20.4 22.0 22.5 25.0 28.0 28.3 30.0 32.0 35.0 37.0 38.0 40.0 47.0 51.0 54.0 60.0

13.20 13.60 13.70 14.90 15.70 16.00 17.20 17.40 19.90 20.40 20.40 20.60 20.70 23.80 26.50 27.00 35.80 39.90 47.40 52.40 60.90

20.90 21.10 18.65 20.00 21.30 20.80 21.00 21.80 23.90 23.90 23.70 23.90 23.90 26.70 29.70 29.00 36.10 42.20 49.10 52.10 63.30

7.0 9.0

M6 x 30 M8 x 1 x 35 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 45 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M10 x 1 x 55 M12 x 1.5 x 70 M12 x 1.5 x 70 M16 x 1.5 x 80 M16 x 1.5 x 80 M16 x 1.5 x 80

1.5 1.5 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.0 3.0 3.0

–

11.0

–

13.5

–

16.0

– –

21.0

– – –

29.0

– –

36.0

–

42.0 48.0

(W570)

(W570)

m

Screw for screw for hole punch

7118 0600– 1600

7118 1000– 1603

Without ball bearing.

With ball bearing.

7118

7118

Screw size mm

Screw size mm

Order No. 0600 0800 1003 1600

Order No. 1000 1200 1603

Hand Tools 7

M8 x 1.0 x 40 M10 x 1.0 x 45 M12 x 1.5 x 55 M16 x 1.5 x 60

1.16 1.16 1.88

M10 x 1.0 x 50 M12 x 1.5 x 60 M16 x 1.5 x 70

9.85

11.00 14.10 (W570)

4.52 (W570)

m

Screw hole punch set (hole puncher)

Design: Supplied in plastic cassette.

7117

Design

Order No. 1000

Set contents

4-piece

92.40

Screw hole punch ∅ 28.3; 32; 35 mm TiAlN sheet drill bit 1/4" ∅ 4–20 mm

(W570)

7/19

Articles marked ◊ are not held in stock, procurement is effected at short notice.