html - Catalog FORMAT plus - 2017 - 2018

Clamping elements 667

Coordinate table with dovetail guide

Design: Made of special cast iron, clamping surface and guides ground. Flatness accuracy is 0.03 mm, lead accuracy over 100 mm is 0.01 mm. The dove tail guides are adjustable by guide rails. Whirled trapezoidal threaded spindle with axial bearings. Graduated drums with zero point adjustment, thus direct reading without conversion possible. With scale division 0.05 mm. The tables from 450 x 240 mm feature a water channel as well as a clamping lever on both axes, so that you can clamp in any position. Application: For use on drilling machines and for light milling work. Note: Other models and dimensions available on request.

Systems

Clamping

3997

Clamping surface mm 300 x 160 450 x 240 580 x 240

Order No.

Number of T-slots

Width of T-slots mm

Distance of T-slots mm

Longitudinal movement mm

Cross motion mm

Spindle pitch mm

Capacity

Full height (-0.01)

Area

Weight

3

kg

mm

kg

0010 0020 0030

1105.00 2022.00 ◊ 2114.00 ◊

3 3 3

10 14 14

50 60 60

180 275 375

100 155 155

2 5 5

75 280 280

78 160 x 160 16 126 259 x 200 52 126 259 x 200 60

(W395)

Pair of precision parallel pads

Design: Case-hardened (hardness 600–700 HV10) and precision plane-parallel ground in pairs. Nominal dimension tolerance in height and width ±0.01 mm. Size measurements on face side. Application: Parallel pads are used as supports for workpieces during various different processes, and help to guarantee parallel clamping.

3869

3869

Width mm

Width mm

Order No. 0001 0003 0005 0007 0009

Height mm

Length mm

Order No. 0011 0013 0015 0017 0019

Height mm

Length mm

4 5 6 8

44.30 45.70 46.90 48.40 50.10 (W342)

12 18 19 26 33

100 100 100 125 125

12

52.10 58.50 60.10 61.20 63.80 (W342)

40 26 33 40 42

125 150 150 150 150

8

10 12 14

10

Set of parallel pads

Design: Nominal sizes to ISO 2768 m. Case-hardened and ground in pairs. Pair tolerance for h = 0.01. Supplied in wooden case, with removable folding lid. Application: Parallel pads are used as supports for workpieces during various different processes. They reduce clamping times thus reducing workpiece costs.

0001

Order No.

Length

mm

150

3870

373.00

Contents of set, 1 pair each h x w mm

14 x 10; 16 x 10; 18 x 10; 20 x 10; 22 x 10; 24 x 10; 26 x 10; 28 x 10; 30 x 10; 32 x 10; 35 x 10; 40 x 10; 45 x 10; 50 x 10

(W340)

3/145

Articles marked ◊ are not held in stock, procurement is effected at short notice.