Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Polishing tools 1437

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Polishing mop Design: Corrugated cloth of varying hardness fixed in a metal ring. Application: For working with pre-sanded parts. For use with bolt clamp (Order No. 8600) for polishing surfaces, hollow parts and profiled workpieces. Note: We recommend using grinding and polishing paste (Order No. 8611+8811) or grinding compound (Order No. 8608) for optimum polishing results. 8597

Hard design. For pre-polishing steel and rust-free steel, aluminium, brass and non-ferrous metals. Soft design. For high-gloss finishes on all metals and synthetics.

8596

8597

8596

8596

8596

8597

8597

∅ mm 80 100 125

∅ mm 150 200

Order No. 0080 0100 0125

Width mm

Hole mm

Order No. 0150 0200

Width mm

Hole mm

3.40 3.80 4.83

2.84 3.14 4.11

10 10 10

10 10 20

6.80

4.83 8.75

10 10

20 20

11.90 (W868)

(W868)

(W868)

(W868)

Spindles

Application: For mounting felt discs (Order No. 8599) and cloth rings (Order No. 8596 and 8597).

8600

Shaft ∅ mm

Order No. 0010 0020 0030

Hole mm

8

11.55 30.70 37.10 (W868)

10 20 20

12

MK1

m

Design: Made of crimped cloth, M14 x 2.0 thread. Note : Detailed information about battery-powered tools is found on page 8/67. Polishing ring for battery-powered devices

8808

Sisal For pre-polishing and removing defects and scratches. We recommend the use of white polishing paste (Order No. 8811 0005) for steel and stainless steel and brown polishing paste (Order No. 8811 0010) for brass.

8809

Notiflex Soft For buffing and producing a high-shine surface. We recommend the use of blue polishing paste (Order No. 8811 0015) for steel, stainless steel, brass, copper and aluminium.

8809

8808

8809

8808

∅

Order No.

Width

Max. rpm min -1 9000

mm 100

mm

Abrasives 8

0100

10.90 (W702)

10.70 (W702)

10

m

Design: Sanding fleece disc, M14 x 2.0 thread. Application: For finishing, deoxidising, light grinding/deburring, smoothing and fine grinding. The result is a fine, matt surface finish. The ring can be used for dry and wet application. Note: Detailed information about battery-powered tools is found on page 8/67. Finishing ring for battery-powered devices

8810

∅

Order No.

Width

Fineness grade

Grit

Max. rpm min -1

mm 100

mm

0100

8.85

10

Fine 180–220 9000

(W702)

8/89

Articles marked ◊ are not held in stock, procurement is effected at short notice.