Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro
Fleece discs/hand pads/Grinding pastes 1438
Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro
Finishing and deburring discs Design: Twisted-fibre fleece disc with resin-bonded silicon carbide. 8016 0005
Scotch-Brite™ FS-WL Open weave for a smooth surface without chatter marks. For achieving distinctive line effects and deburring light grooves on stainless steel profiling and for almost all other finishing work. Scotch-Brite™ DB-WL Solid construction for higher edge resistance, grit performance and life. Universally used for deburring. Easy for working with contoured workpieces. Scotch-Brite™ XP-WL Very strong construction for very high edge strength,
8016 0005
8016 0010
8016 0010
8019
8019 0010
cutting performance and service life. Universally used for deburring. Easy for working with contoured workpieces.
Plastic FRP wood
Aluminium
Steel
Carbide
INOX
Cast
Stone
Paint
Order No.
8016/8019
C
C
C
8019
8016
Hardness/fineness
Order No. 0005 0010 0010
Grit
Dia. x width x bore mm 152 x 25.4 x 25.4 152 x 25.4 x 25.4 152 x 25.4 x 25.4
Max. rpm min -1
6/fine 9/fine 11/fine
87.90 80.60
– –
180–220 180–220 180–220
6000 6000 6000
–
126.00 (W812)
(W812)
Hand pads
Design: With a plastic handle in 4 different colours. Total length 125 mm, pad size 60 x 20 x 10 mm. Application: For cleaning cutting edges, to remove build-up on edges and to extend the tool‘s life. The cutting edges are drawn off at an angle of 25 ° to 40 °. Ideal for lapping chamfers on free- and angle-ground surfaces, for breaking hard metal and HSS cutting edges after cutting and for re-lapping cutting inserts, punching tools, milling tools, cutter heads, reamers etc.
Plastic FRP wood
Aluminium
Steel
Carbide
INOX
Cast
Stone
Paint
Order No.
8593
C
C
V
8593
Grit
Order No. 0180 0220 0360 0500
Colour
Grain µm
Use
180 (yellow) 220 (blue) 360 (red) 500 (green)
46.00 46.00 46.00 49.00 (W867)
130 For carbide and hardened steel / coarse cut 100 For carbide and hardened steel / medium cut 50 For carbide and hardened steel / fine cut 25 For carbide and hardened steel / fine cut
Yellow
Blue Red
Green
Lapping and grinding pastes
Design: Supplied in 100 g tubes. Application: For machine and manual lapping. For use in ratios 1:5 to 1:100 diluted with oil, turpentine or benzene. For working with hard work pieces a coarser grain (80 to 500) is needed and with softer pieces a finer grain (750 to 2000).
Abrasives 8
Plastic FRP wood
Aluminium
Steel
Carbide
INOX
Cast
Stone
Paint
Order No.
8605
C
C
C
8605
8605
Grit
Grit
Order No. 0120 0180 0220 0360 0500
Grit size µm
Order No. 0750 1000 1500 2000
Grit size µm
120 180 220 360 500
37.30 37.30 38.90 40.00 41.70 (W867)
180 130 100 50 25
750 1000 1500 2000
44.80 45.70 47.90 52.10 (W867)
10
5 3 1
8/90
Made with FlippingBook Online document