Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Jigsaw blades 373

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Jigsaw blades for hard wood

Saw blade quality: Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Teeth milled, clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics. Teeth ground, side clearance side set: Blade for clean, fast cuts in wood. Teeth ground, side clearance lead angle ground: Blade with taper ground back for side clearance; for precise, fine and clean cuts in wood and plastic. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Design: 5 pieces on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

Cutting Tools 2

2736

Bosch No.

Order No. 0006

Cutting length mm

Material

Wood mm 3–30

Tooth pitch mm

Type of tooth

Use

T 101 BF

12.95

74

Bimetal

2.7

teeth ground; side clear- ance lead angle ground teeth ground; side clearance lead angle ground; pointed teeth

For straight, fine and clean cuts in coated boards/HPL, plastic/epoxy, hard wood, laminates, with plunge tip.

0051

T 101 AIF

13.20

77

Bimetal

2–30

1.7

For straight, fine and clean cuts in coated boards/ HPL (2–30 mm), plastic/epoxy (∅ < 30 mm), hard wood, laminates, with plunge tip.

0052

T 301 CDF

15.85

91

Bimetal

4–65

3

Lead angle ground, teeth ground

For hard and soft wood, coated, panels/HPL, clean cuts.

0105

T 144 DF

11.40

74

Bimetal

5–50 progressive 4–5.2

ground; side set

For hard and soft wood, all types of boards, including coated ones, straight, fast cuts, with plunge tip.

(W247)

Jigsaw blade for wood with metal

Saw blade quality: Bimetal: Highly flexible, almost unbreakable combination of HCS and HSS. The area of application covers hard wood, abrasive wooden materials, hard plastics, non-ferrous metals and metals. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Design: 5 pieces on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

2736

Bosch No.

Order No. 0106

Cutting length mm

Material Metal mm

Wood mm

Plastic mm

Tooth pitch mm

Type of tooth

Use

T 345 XF

12.95

106

Bimetal 3–10 < 65 3–10 progressive 2.4–5

milled; side set

For construction wood with nails (< 65 mm), Alu/plastic pipes + profiles (∅ 3–10 mm), quick cuts with plunge tip.

(W247)

2/119

Articles marked ◊ are not held in stock, procurement is effected at short notice.