Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Jigsaw blades 374

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Jigsaw blades for special applications

2735

Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.

Saw blade quality: Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete.

2736

Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade. Design: 5 pieces on card, T 341 HM, 3 pieces on card. T 141 carbide, 1 blade on card . Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

Saw blade quality: HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance side set. Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.

Cutting Tools 2

2736

Bosch No. 2735

Order No. 0008

Cutting length mm

Material Wood mm

Plastic mm

Tooth pitch mm

Type of tooth

Use

T 101 BIF

–

13.10

59 Bimetal 1.5–15 –

1.7 Lead angle ground, teeth ground

Specially designed for laminate, plastic-coated boards and multiplex boards.

0071

T 101 A –

11.30

74

HSS – 2–20

2

Lead angle ground, teeth ground

For fine, straight cuts, ideal for Perspex and polycarbonate.

0107

T 341 HM –

32.00

106 Carbide – 5–80

4.3 Carbide-tipped; side set 4.3 Carbide-tipped; side set

For quick, straight cuts, ideal for glass fibre reinforced plastic, cement fibre boards, plasterboard.

0110

T 141 HM 10.40 12.00

74 Carbide – 5–50

Specially designed for GRP, plasterboard, cement fibre boards.

(W248)

(W247)

Jigsaw blades for plastics

Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades for clean cutting results in typically commercial plastics and shapes. Design: 5 pieces on card, T 108 BHM and T 301 CHM, 3 pieces on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

Saw blade quality: HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance side set. Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals.

2736

Bosch No.

Order No. 0150

Cutting length mm

Material

Plastic mm 5–30

Tooth pitch mm

Type of tooth

Use

T 102 D

8.60

100

HCS

4.0

Lead angle ground, teeth ground Lead angle ground, teeth ground Lead angle ground, teeth ground ground, side set

For the problem-free, clean sawing of polypropylene (PP) and similar soft thermoplastic materials.

0155

T 102 H

8.60

100

HCS

3–30

2.3

For the problem-free, clean sawing of PVC and similar soft thermoplastic materials.

0160

T 302 H

12.65

132

HCS

3–65

2.3

For PVC (polyvinyl chloride), is often used for windows and structural elements.

0165

T 102 BF

11.30

92

BiM 2–20

1.8

For the clean, splinter-free sawing of PMMA (polymethyl methacrylate), is used e.g. for balcony panelling and shower doors.

0170 T 108 BHM

22.60

92

Carbide

0–20

2.2

Carbide-tipped, ground Carbide-tipped, ground

Use: For easy, clean sawing of CFK and similar plastics such as carbon fibre.

0175 T 301 CHM

31.70

117

Carbide

0–65

3.3

For easy cutting of Corian ® and similar solid surface materials such as Varicor ® .

(W247)

2/120