Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Jigsaw blades 376

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Jigsaw blades for metal in storage box

Design: 25 pieces in box. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

Saw blade quality: HSS: Fully hardened high-speed steel for use in harder materials such as metal, aluminium and non-ferrous metals. Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Tooth design: Teeth milled, clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics.

2739

2738

Bosch No.

Order No. 0025

Cutting length mm

Material Metal mm

Tooth pitch Type of tooth

Use

Cutting Tools 2

T 118 A

26.90

31.00

67

HSS 1–3 progressive 1.1–1.5

Milled, wavy set

For thin metal sheets, with plunge tip.

0045

T 118 AF

–

41.00

67

Bimetal

1–3 progressive 1.1–1.5

Milled, wavy set

For thin metal sheets.

(W248)

(W247)

Jigsaw blades for stainless steel

Saw blade quality: Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance wavy set. Blade with fine result for straight cuts in soft steel, aluminium, non-ferrous metals and plastics. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals.

Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals), is recommended in order to extend the wear-resistance of the saw blade. Design: 5 pieces on card (exception: 2736 0108 and 2736 0109, 3 pieces on card). Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

2736

Bosch No.

Order No. 0057

Cutting length mm

Material

Metal mm

Tooth pitch mm

Type of tooth

Use

T 118 GFS

11.60

57

Bimetal

0.5–1.5

0.8

Wavy set; milled

For INOX materials.

0068

T 118 EFS

11.60

57

Bimetal

1.5–4

1.4

Wavy set; milled

For INOX materials.

0108 T 118 AHM

21.60

59

Carbide

1.5–3

1.1

carbide tipped; ground

For working thin stainless steel sheets, with reduced stroke rate, cooling, without orbital action.

0109 T 118 EHM

21.60

59

Carbide

2 –5

1.4

carbide tipped; ground

For semi-thick stainless steel sheets (INOX), with metal reduced stroke rate, with coo- ling working without orbital action.

(W247)

Jigsaw blade for ceramic products

Saw blade quality: Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade.

Design: 3 pieces on card. Suitable for: Bosch, AEG, Milwaukee, DeWalt, ELU, Festool, Hitachi, Mafell, Makita, Metabo, Protool.

2736

Bosch No.

Order No.

Cutting length

Material

Ceramic materials mm

Type of tooth

Use

mm

0111

T 130 Riff

12.40

59

Carbide

5–15

Carbide-tipped

For soft ceramic wall tiles, GRP, cast iron, coarse cut.

(W247)

2/122