Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Reciprocating saw blade 377

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Sabre saw blade Saw blade quality: HCS: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Teeth milled, clearance wavy set: Blade with fine result for straight cuts in plywood, soft steel, aluminium, non-ferrous metals and plastics.

Teeth ground, side clearance side set: Blade for clean, fast cuts in wood. Teeth ground, side clearance lead angle ground: Blade with taper ground back for side clearance; for precise, fine and clean cuts in wood and plastic. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic. Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade.

Cutting Tools 2

Sabre saw blades for wood

Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade. Design: 5 pieces in PVC pouch, (exception: 2748, 25 piece) Suitable for: All saber, reciprocal and tiger saws with standard shank.

Saw blade quality: HCS: High carbon steel for use in softer materials such as wood, wood fibre boards and plastics. Tooth design: Teeth ground, side clearance side set. Blade for clean, fast cuts in wood and plastic. Tooth pitch: Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.

2746 0007 For timber (< 150 mm), boards: chipboard, MDF (6–60 mm), plywood, plastic (< 150 mm), wooden wall (< 150 mm). Effortless fine cut.

2744/46/48 0010 For timber, wooden walls, boards: chipboard, MDF, plywood, plastic, specially designed for plunge cuts.

2744/46/48 0020 For rough wood, nail-free, green wood, pruning, firewood.

2746

2748

Bosch No. 2744

Order No.

Total length

Material Rough wood, nail-free

Construction timber

Boards

Wooden panel cutout mm

Green wood, pruning mm

Plastics, epoxy

Tooth pitch

Type of tooth

mm

mm

mm

mm

mm

mm

0007 S 2345 X –

20.20

–

200 HCS

–

< 150 6–60 < 150

– < 150 2.5–4.3/ 6–10

side set; ground

0010

S 644 D 11.25 12.90 58.20 *

150 HCS

–

< 100 6–60 < 100

– < 100 4.3 side set; ground

0020

S 1531 L 17.60 20.30 90.90 *

240 HCS < 190

–

–

–

< 190 –

5.0 side set; ground

(W248)

(W247)

(W247)

* 25 pieces.

Sabre saw blades for special applications

Saw blade quality: Carbide-tipped: The HSC blade is equipped with carbide teeth and is thus suitable for abrasive materials such as glass-fibre-reinforced plastics, asbestos cement, hard woods and aerated concrete. Tooth design: Teeth ground, side clearance side set. Blade for clean, fast cuts in wood and plastic.

Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific

coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear- resistance of the saw blade. Design: 2 pieces in PVC pouch. Suitable for: All saber, reciprocal and tiger saws with standard shank.

2746 0130 For aerated concrete, brick (red), fibre cement, GRP/epoxy, for abrasive materials.

2746 0140 For cast steel pipes, brick (red), GRP/epoxy.

2746

Bosch No.

Order No.

Total length mm

Material Fiber cement mm

Porous concrete (aerated concrete) PB2, PP2 mm

Red brick mm

GRP, Epoxy mm

INOX steel sheets mm

Stainless steel profiles mm

Type of tooth

0140 S 1130 RIFF 0130 S 1141 HM

16.60 33.90

225 Carbide – 225 Carbide < 175

–

< 175 < 175 – < 175 < 150 –

– –

coated

< 175

side set; ground

(W247)

2/123

Articles marked ◊ are not held in stock, procurement is effected at short notice.