Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Reciprocating saw blade 378

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Sabre saw blades for wood with metal

Application: Saw blades are subject to high mechanical and thermal loads. For this reason, the use of specific coolants, e.g. cutting oil (for steel, metals) or water (for aluminium, INOX, thin sheets), is recommended in order to extend the wear-resistance of the saw blade. Design: 5 pieces in PVC pouch, (exception: 2748, 25 piece) Suitable for: All saber, reciprocal and tiger saws with standard shank.

Saw blade quality: Bimetal: Highly flexible, almost non-breakable combination of HSC and HSS, long service life. Can be used for hard woods, abrasive wooden materials, hard plastic, non-ferrous metals and metals. Tooth design: Teeth milled, side clearance side set: Blade with relatively coarse cut and fast work progress in hard and soft wood, aluminium, plastics and non-ferrous metals. Tooth pitch: Small tooth pitch for fine cuts with slower work progress, in hard and/ or thin material such as metals and non-ferrous metals. Large tooth pitch for coarser cuts coupled with fast work progress in soft and/or thick material such as wood and plastic.

Cutting Tools 2

2744 0050 For pallet repairs, wood with nails/metal, metal sheets, pipes, aluminium profiles. For wood with nails/metal.

2746 0052 For wood with nails/metal, chipboard, porous concrete, plastic/GRP, profiles.

2748 0055 For pallet repairs, wood with nails/metal, metal sheets, pipes, aluminium profiles.

2744 0056 For wood with nails/metal. Plastic profiles (∅ 3–250 mm).

2746/48 0060 For wood with nails/metal, chipboard, metal sheets, pipes, aluminium profiles, plastics/ GRP, solid window frames: wood plus metal, specially designed for plunge cuts.

2746 0066 For wood with nails/metal, chipboard, metal sheets, aluminium, plastic/GRP, profiles.

2746/48 0075 For wood with nails/metal, metal sheets, pipes, aluminium profiles, plastic profiles.

2744/46/48 0080 For wood with nails/metal, metal sheets, pipes, aluminium profiles, flexible flush cut. For wood with nails/metal. Plastic profiles (∅ 3–175 mm).

2746 0240 For wood with nails/metal (< 250 mm), metal sheets, aluminium profiles (3–10 mm), GRP/epoxy (∅ < 250 mm), flexible flush cut.

2746 0080 For wood with nails/metal, metal sheets, pipes, aluminium profiles, flexible flush cut. For wood with nails/metal. Plastic profiles (∅ 3–175 mm).

2748 0035 For thin sheet metal, pipes, profiles

2746

2748

Bosch No. 2744

Order No.

Total length

Material Wood

Pallets

Wood, chip- board

Sheet metal, pipes, profiles

Plastics: pipes, profiles

Plastics, epoxy

Tooth pitch

Type of tooth

with nails/ metal

mm

mm

mm

mm

mm

mm

mm

mm

0035

S 922 EF

–

–

62.60 *

150 Bimetal < 100 – –

–

–

– 1.4/18 side set; milled

0050

S 922 HF 12.05

–

–

150 Bimetal < 100 < 100 –

3–12

–

–

2.5 side set; milled

0052 S 1411 DF

–

23.10

–

300 Bimetal < 250 – < 250

–

< 250 < 60 4.3/6 side set; milled

0055 S 1122 HF

–

–

95.70 *

225 Bimetal < 175 < 175 –

3–12

–

– 2.5/10 side set; milled

0056 S 1222 VF 20.10

–

–

300 Bimetal < 250 – –

3–10

– < 250 1.8–2.6 side set; milled < 100 < 50 4.3/6 side set; milled < 100 < 50 4.3 side set; milled

0060

S 611 DF

–

–

68.30 *

150 Bimetal < 100 – < 100

–

0060

S 611 DF

–

15.15

–

150 Bimetal < 100 – < 100

–

0066 S 3456 XF

–

22.40

–

200 Bimetal < 150 – < 150 3–18 < 150 < 150 2.1–4.3/ 6–12

side set; milled side set; milled

0075

S 922 VF

–

13.90

–

150 Bimetal < 100 – –

3–10

– < 100 1.8–2.6/ 10-14

0075

S 922 VF

–

–

62.60 *

150 Bimetal < 100 – –

3–10

– < 100 1.8–2.6 side set; milled – < 175 1.8–2.6 side set; milled

0080 S 1122 VF 18.50 21.40 95.70 *

225 Bimetal < 175 – –

3–10

0240 S 1222 VF

–

23.10

–

300 Bimetal < 250 – –

3–10

– < 250 1.8–2.6/ 10–14

side set; milled * 25 pieces.

(W248)

(W247)

(W247)

2/124