Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Dial calipers/Digital pocket calipers 728

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

m

Caliper with scales dislpay

Design: Made of rustproof steel, hardened. Vernier and scale division matt chrome-plated, main scale slightly stepped to protect against wear, with rectangular depth gauge , rear side with thread table. Supplied in a case. Application: For inside, outside, depth and step measurements. Note: Depth measuring bridge 75 x 7 mm (order no. 4024 0075, Ç 4/13).

DIN 862

INOX

4013

Measurement range mm

Order No.

Design

Reading below mm

Reading above inch

Jaw length mm

0152 0252 0352 0153 0253 0353 0154

150 200 300

28.50 77.00

with locking screw 0.05 1/ 128 40 with locking screw 0.05 1/ 128 50 with locking screw 0.05 1/ 128 64 with locking screw 0.02 1/1000 40 with locking screw 0.02 1/1000 50 with locking screw 0.02 1/1000 64 with torque locking 0.05 1/ 128 40

185.50

4013 0152 with locking screw

150* 200* 300*

36.00 85.50

193.00 35.00 (W488)

150

* Accuracy acc. to company standard.

4013 0154 with torque locking

Dial caliper

Design: Made of stainless steel, hardened, reading parts matt chrome-plated, toothed rack covered, measuring faces precision ground, with roller fine adjustment, locking screw and rectangular depth gauge. Supplied in an artificial leather case. Application: For inside, outside, depth and step measurements. Note: Depth measuring bridge 75 x 7 mm (Order No. 4014 0075, Ç 4/13).

DIN 862

INOX

Equipment

Measuring

4

4013

Measurement range mm

Order No. 0150 0151

Reading mm

Pointer revolution mm

Jaw length mm

150 150

39.10 42.70 (W401)

0.02 0.01

2 1

40 40

m

Dial caliper

Design: Made of stainless steel, hardened, reading parts matt chrome-plated, with roller fine adjustment and locking screw and rectangular depth gauge. Rotatable dial for zero-point adjustment. Supplied in a case. Application: For inside, outside, depth and step measurements. Note: Depth measuring bridge 75 x 7 mm (order no. 4024 0075, Ç 4/13).

DIN 862

INOX

4015

Measurement range mm

Order No. 2150 2151

Reading mm

Pointer revolution mm

Jaw length mm

150 150

98.00 81.50 (W488)

0.01 0.02

1 2

40 40

Digital pocket caliper with drive wheel

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw, digit height of LCD display 12 mm, with data output RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Function: On and off switch, mm/inch-switching, reset (zero setting) possible in any position.

DIN 862

INOX RS232

∅ 1,6 mm

Application: For inside, outside, depth and step measurements. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13).

4006

Measure- ment range mm

Order No.

Design

Reading

Jaw length mm

0151 0150 0152 0200 0300

150 150

35.90 30.80 61.60 56.40 92.30 (W409)

with round depth gauge 0.01 mm (0.0005 inch) 40 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 with rectangular depth gauge 0.01 mm (0.0005 inch) 40 with rectangular depth gauge 0.01 mm (0.0005 inch) 50 with rectangular depth gauge 0.01 mm (0.0005 inch) 60

4006 0200

150*

200 300

* With HM measuring faces.

4/8