Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital pocket caliper 729

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Digital pocket caliper with metal housing

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw, digit height of LCD 12 mm. Supplied with battery CR 357, 1.5 V, in a plastic case. Function: On and off switch, mm/inch-switching, reset (zero setting) possible in any position.

DIN 862

INOX

Application: For inside, outside, depth and step measurements. Note: Replacement battery: (Order No. 4026 0357, Ç 4/13).

4007

Measurement range mm

Order No. 0150

Design

Reading

Jaw length mm

150

36.90 (W409)

with rectangular depth gauge

0.01 mm (0.0005 inch)

40

The Absolute System • The measuring tool is always ready to measure • The zero position stays locked for other measurements after setting once. • No zeroing after switching.

Absolute function

Pocket caliper for left-handers

Equipment

Measuring

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw. Digit height of the LCD display 12 mm, with data output RS 232. Supplied with battery CR 357, 1.5 V, in plastic case. Functions: On and automatic off switch, mm/inch switching, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position.

DIN 862

INOX Absolute function

4

RS232

Application: For inside, outside, depth and step measurements. Note: Replacement battery: (Order No. 4026 0357, Ç 4/13).

4007

Measurement range mm

Order No. 2150

Design

Reading

Jaw length mm

150

66.70 (W409)

with rectangular depth gauge

0.01 mm (0.0005 inch)

40

m

Digital pocket caliper with absolute system

Design: Made of stainless steel, hardened, metal housing, with locking screw. Supplied with adapter for drive roller and battery CR1632, 3 V, in plastic case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Application: For inside, outside, depth and step measurements. Note: Replacement battery available upon request.

DIN 862

INOX Absolute function

4007

Measurement range mm

Order No. 3150 3200 3300

Design

Reading

Jaw length mm

150 200 300

51.30 66.70

with rectangular depth gauge with rectangular depth gauge with rectangular depth gauge

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

40 50 60

107.50 (W409)

4/9

Articles marked ◊ are not held in stock, procurement is effected at short notice.