Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital depth gauge calipers 743

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD display 6 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in a wooden box. Functions: Switch-on and off, mm/inch-switching, reset (zeroing) possible in any position, hold function (measurement value memory). Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable (Order No. 4025 0002, Ç 4/13). Digital depth gauge calipers with straight measuring rod DIN 862

opto RS232

INOX

Certificate

4078 2000

4078

Measurement range mm

Order No. 1200 1300 1500 2000

Reading

Bridge length mm

Measuring bar cross-section mm

200 300 500 1000

68.70

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 150 150 250

14.5 x 4 14.5 x 4 14.5 x 4 14.5 x 4

113.00 195.00 564.50 (W400)

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD display 8 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Functions: On and automatic off switch, mm/inch switching, ABS (absolute and relative measurements), no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable (Order No. 4025 0002, Ç 4/13). Digital depth gauge calipers with straight measuring rod DIN 862

Equipment

Measuring

opto RS232

Absolute function

INOX

IP 54

4

4098

Measurement range mm

Order No. 0200 0300 0500

Reading

Bridge length mm

Measuring bar cross-section mm

200 300 500

93.90

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 150 150

12 x 4 12 x 4 12 x 4

159.00 297.50 (W435)

Design: Made of stainless steel, hardened, measuring faces precision ground, with locking screw, digit height of LCD display 7.5 mm, inductive measurement system, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied with battery CR 2032, 3 V, in a wooden case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position, ± pre-set function (measurement value presetting). Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable USB (Order No. 4025 0003, Ç 4/13). Data cable Digimatic (Order No. 4025 0004, Ç 4/13). Data cable RS 232 available on request. Digital depth gauge caliper with straight measuring rod DIN 862 USB

Absolute function

Certificate RS232

INOX

IP 67

Digimatic

4080

Measurement range mm

Order No. 1150 1200 1300 1500 2000

Reading

Bridge length mm

Measuring bar cross-section mm

150 200 300 500 1000

272.50 m

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 100 150 150 250

12 x 4 12 x 4 12 x 4 12 x 4 30 x 7

291.50 338.50 438.50 1246.00

(W404)

4/23

Articles marked ◊ are not held in stock, procurement is effected at short notice.