Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital depth gauge calipers 744

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

Digital depth gauge caliper with double-sided stepped measuring rod

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD display 6 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Functions: On and automatic off switch, mm/inch switching, ABS (absolute and relative measurements), no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable (Order No. 4025 0002, Ç 4/13).

DIN 862

opto RS232

Absolute function

INOX

IP 54

4097

Measurement range mm

Order No. 0300

Reading

Bridge length mm

Measuring bar cross-section mm

300

172.00 (W435)

0.01 mm (0.0005 inch)

150

12 x 4

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD display 8 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Functions: On and automatic off switch, mm/inch switching, ABS (absolute and relative measurements), no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable (Order No. 4025 0002, Ç 4/13). Digital depth gauge calipers with stepped measuring rod DIN 862

opto RS232

Absolute function

INOX

IP 54

Equipment

Measuring

4

4096

Measurement range mm

Order No. 0300 0500

Reading

Bridge length mm

Measuring bar cross-section mm

300 500

154.50 294.00 (W435)

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

150 150

12 x 4 12 x 4

Design: Made of stainless steel, hardened, with locking screw, digit height of LCD display 7.5 mm, inductive measurement system, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied with plate measuring insert ∅ 7.5 x 1 mm, measuring insert ∅ 4 mm, flat and spherical, battery CR 2032, 3 V, in a wooden box. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position, ± pre-set function (measurement value presetting). Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable USB (Order No. 4025 0003, Ç 4/13). Data cable Digimatic (Order No. 4025 0004, Ç 4/13). Data cable RS 232 available on request. Digital depth gauge calipers with plate measuring insert DIN 862

Absolute function

RS232

INOX

USB

Digimatic

4084

Measurement range mm

Order No. 0100

Reading

Bridge length mm

Measuring bar cross-section mm

100

529.50 (W404)

0.01 mm (0.0005 inch)

85

16 x 3

M 2,5

m

Slitter insert

Design: Made of rustproof steel, adapter M2.5. Note: Further measuring inserts from Ç 4/49.

4084

Plate-∅ mm

Order No. 0150

4

1

ø7,5

7.5

20.20 (W404)

4/24