Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital depth gauge calipers 745

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Digital depth gauge caliper with measuring pin

Design: Made of stainless steel, hardened, measuring faces precision ground and hardened, with locking screw, digit height of LCD display 8 mm, with data output Opto RS 232. Supplied with battery CR 2032, 3 V, in plastic case. Functions: On and automatic off switch, mm/inch-switching, ABS (absolute and relative measurements), zero setting possible in any position. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable (Order No. 4025 0002, Ç 4/13).

DIN 862

opto RS232

INOX IP 54

4097

Measurement range mm

Order No. 0025

Reading

Bridge length mm

Measuring pin ∅ mm

25

69.20 (W435)

0.01 mm (0.0005 inch)

50

1.5

m

Digital depth gauge caliper with stepped measuring surface

Design: Made of rustproof steel, hardened, with locking screw, digit height of LCD display 7.5 mm, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied in wooden case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable Digimatic (Order No. 4025 0004, Ç 4/13). Data cable USB (Order No. 4025 0003, Ç 4/13). Data cable RS 232 available on request.

DIN 862

Absolute function

INOX IP 67 Certificate

Equipment

Measuring

4

4093

Measurement range mm

Order No. 1150 1200 1300 1500

Reading

Bridge length mm

Measuring bar cross-section mm

150 200 300 500

332.00 376.00 422.00 485.00 (W410)

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 100 150 150

8 x 3 8 x 3 12 x 4 12 x 4

m

Digital depth gauge calipers with measuring pin

Design: Made of rustproof steel, hardened, with locking screw, digit height of LCD display 7.5 mm, with data output variable RS 232, USB and Digimatic (DATA Variable). Supplied with battery CR 2032, 3 V, in wooden case. Functions: On and automatic off switch, mm/inch switching, automatic switching by means of slider movement, key lock set for zero position, no re-zeroing after switching (absolute system), reset (zeroing) possible at each position. Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Data cable Digimatic (Order No. 4025 0004, Ç 4/13). Data cable USB (Order No. 4025 0003, Ç 4/13). Data cable RS 232 available on request.

DIN 862

Absolute function

INOX IP 67 Certificate

4093

Measurement range mm

Order No. 2200 2300

Reading

Bridge length mm

Measuring pin ∅ mm

200 300

409.50 455.50 (W410)

0.01 mm (0.0005 inch) 0.01 mm (0.0005 inch)

100 150

2 2

4/25

Articles marked ◊ are not held in stock, procurement is effected at short notice.