Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Outside micrometers 755

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

m

Outside spline micrometer

Design: Operating and reading parts matt chrome-plated, hard-lacquered steel bracket, hardened and ground spindle, carbide reinforced, quick drive, measuring force regulation through ratchet stop, with clamping device. Available from measuring range 25–-50 mm with dimension adjustment, in case. Application: For measuring grooves, splined shafts, recesses, etc.

DIN 863-3

4132

Measurement range mm

Order No. 6025 6050 6075 6100

Reading mm

Spindle ∅ mm

Drum ∅ mm

0– 25 25– 50 50– 75 75–100

198.00 241.50 275.00 292.00 (W488)

0.01 0.01 0.01 0.01

3.0 3.0 3.0 3.0

17.5 17.5 17.5 17.5

m

Outside blade micrometer

Design: Operating and reading parts matt chrome-plated, hard-lacquered steel bracket, hardened and ground spindle, carbide reinforced, quick drive, measuring force regulation through ratchet stop, with clamping device. Available from measuring range 25–-50 mm with dimension adjustment, in case. Application: For measuring narrow grooves, recesses, etc.

Factory standard

4132

Measurement range mm

Order No. 2025 2050 2075 2100

Reading mm

Spindle thickness mm

Drum ∅ mm

Equipment

Measuring

0– 25 25– 50 50– 75 75–100

275.00 336.00 358.00 390.00 (W488)

0.01 0.01 0.01 0.01

0.8 0.8 0.8 0.8

17.5 17.5 17.5 17.5

4

m

Outside disc micrometer

Design: Operating and reading parts matt chrome-plated, hard-lacquered steel bracket, hardened and ground spindle, carbide reinforced, quick drive, measuring force regulation through ratchet stop, with clamping device. Available from measuring range 25–-50 mm with dimension adjustment, in case. Application: For measuring tooth distances Wk from module 0.8 as indirect determination of tooth thickness for spur gears with straight and helical teeth, recesses on shafts, recess distances, centring wheels, soft materials such as rubber, cardboard, felt, etc.

DIN 863-3

4132

Measurement range mm

Order No. 3025 3050 3075 3100

Reading mm

Spindle ∅ mm

Drum ∅ mm

0– 25 25– 50 50– 75 75–100

273.00 309.00 318.00 378.00 (W488)

0.01 0.01 0.01 0.01

25.0 25.0 25.0 25.0

19.0 19.0 19.0 19.0

m

Outside micrometer for thread measurement

Design: Operating and reading parts matt chrome-plated, steel bracket, spindle and anvil with mounting bore for exchangeable measuring inserts, hardened and ground, steel ball in bottom of hole for the installation of measurement inserts, anvil adjustable, measuring force regulation through ratchet stop, with clamping device. Supplied in a case. Application: For measuring flanges and outer diameters on external threads by means of exchangeable measurement inserts. Note: Adjustment dimensions (Order No. 4118, Ç 4/37).

DIN 863-3

4132

Measurement range mm

Order No. 4025 4050 4075 4100

Reading mm

Spindle ∅ mm

Drum ∅ mm

0– 25 25– 50 50– 75 75–100

360.00 431.00 465.00 504.00 (W488)

0.01 0.01 0.01 0.01

6.5 6.5 6.5 6.5

19.0 19.0 19.0 19.0

4/35

Articles marked ◊ are not held in stock, procurement is effected at short notice.