Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Bore micrometers 764

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

m

Digital inside micrometer set

Design: With 3-line, self-centring measuring head, measuring probe from 12 mm carbide reinforced. From 40 mm measuring head made of aluminium to save weight, digit height of LCD display 8.5 mm, data output variable with wireless connection (with optional transmitter module), RS 232, Digimatic and USB. Supplied with basic unit, measuring head and battery CR 2032, 3 V, in case. Functions: With mm/inch switching, automatic switching by means of slide movement, key lock set for zero position, re-zeroing after switching deleted (absolute system), ABS (switching from relative to absolute measurement), reset (zeroing) possible at each position, ± pre-set function (setting a numerical value), ABS (switching from relative to absolute measurement). Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Radio receiver (Order No. 4942 0030, Ç 4/129). Transmitter module for e-Stick (Order No. 4942 0040, Ç 4/130). Data cable RS 232 (Order No. 4942 0055, Ç 4/130). Data cable USB (Order No. 4942 0050, Ç 4/130). Data cable Digimatic (Order No. 4246 0185, Ç 4/54).

DIN 863-4

IP 52 Absolute function

RS232

USB

Digimatic

4168

Measurement range mm

Order No. 3100

Set contents

6– 12

1690.00

3 micrometers 6.0–8.0 mm, 8.0–10.0 mm and 10.0–12.0 mm 2 adjusting rings 8 mm, 10 mm

3110

12– 20

1475.00

2 micrometers 12.0–16.0 mm and 16.0–20.0 mm 1 adjusting ring 16 mm

Equipment

Measuring

4

3120

20– 50

2290.00

4 micrometers 20.0–25.0 mm, 25.0–30.0 mm, 30.0–40.0 mm and 40.0–50.0 mm 2 adjusting rings, 25 and 40 mm 4 micrometers 50.0–60.0 mm, 60.0–70.0 mm, 70.0–85.0 mm and 85.0–100.0 mm 2 adjusting rings, 60 and 85 mm

3125

50–100

2755.00

(W488)

m

Inside measuring pistol

Design: Connection thread to exchange measuring heads, self-centring measuring head with three measuring heads protruding from the right offset by 120°, measuring probe from 12 mm carbide reinforced. From 12 mm measuring probe to bottom of hole, from 40 mm measuring head made of aluminium to save weight. Supplied with: Basic device, measuring head, without display device, in case. Application: For the measurement of through-holes, blind holes and centering shoulders. Note: Dial gauge 0.0005 mm (Order No. 4246 0050, Ç 4/51).

Werks- norm Factory standard

4168

Measurement range mm

Order No. 4000 4010 4015 4020 4025 4030 4035 4040 4045 4050 4055 4060 4065

Error limit µm

Measuring depth mm

Measuring depth with extension mm

6– 8 8– 10 10– 12 12– 16 16– 20 20– 25 25– 30 30– 40 40– 50 50– 60 60– 70 70– 85 85–100

759.00 ◊ 759.00 ◊ 771.00 ◊ 777.00 ◊ 798.00 ◊ 798.00 ◊ 819.00 ◊ 858.00 ◊ 858.00 ◊ 924.00 ◊ 936.00 ◊ 951.00 ◊ 963.00 ◊

3 3 3 3 3 3 3 3 3 4 4 4 4

58 58 58 64 64 68 68 76 76 79 79 97 97

133 133 133 139 139 218 218 226 226 229 229 247 247

(W488)

4/44