Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Inside measuring pistol/dial gauge 765

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

m

Inside measuring pistol set

Design: Connection thread to exchange measuring heads, self-centring measuring head with three measuring heads protruding from the right offset by 120°, measuring probe from 12 mm carbide reinforced. From 12 mm measuring probe to bottom of hole, from 40 mm measuring head made of aluminium to save weight, data output variable radio transmission, RS 232, Digimatic and USB. Supplied with: Basic device, measurinf head and display device, in case. Application: For the measurement of through-holes, blind holes and centering shoulders. Functions: On and automatic off switch, mm/inch switching, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position, ± pre-set function (setting a numerical value), ABS (switching from relative to absolute measurement). Note: Replacement battery: (Order No. 4026 2032, Ç 4/13). Radio receiver (Order No. 4942 0030, Ç 4/129). Transmitter module for e-Stick (Order No. 4942 0040, Ç 4/130). Data cable RS 232 (Order No. 4942 0055, Ç 4/130). Data cable USB (Order No. 4942 0050, Ç 4/130). Data cable Digimatic (Order No. 4246 0185, Ç 4/54).

Factory standard

Absolute function

RS232

USB

Digimatic

4168

Measurement range mm

Order No. 4070

Set contents

6– 12

1795.00 ◊

3 micrometers 6.0–8.0 mm, 8.0–10.0 mm and 10.0–12.0 mm 2 adjusting rings 8 mm, 10 mm 1 dial gauge 0.0005 mm

Equipment

Measuring

4075

12– 20

1600.00 ◊

2 micrometers 12.0–16.0 mm and 16.0–20.0 mm 1 adjusting ring 16 mm 1 dial gauge 0.0005 mm

4

4080

20– 50

2360.00 ◊

4 micrometers 20.0–25.0 mm, 25.0–30.0 mm, 30.0–40.0 mm and 40.0–50.0 mm 2 adjusting rings, 25 and 40 mm 1 dial gauge 0.0005 mm 4 micrometers 50.0–60.0 mm, 60.0–70.0 mm, 70.0–85.0 mm and 85.0–100.0 mm 2 adjusting rings, 60 and 85 mm 1 dial gauge 0.0005 mm

4085

50–100

2865.00 ◊

(W488)

Precision dial gauge

Design: Robust metal housing, measuring bolts and clamping shaft (∅ 8 mm h6) are hardened, ground and made of stainless steel. Supplied in plastic case. Note: Suitable measuring inserts M2.5 are found on Ç 4/49.

DIN 878

4200 4203

Matt chrome-plated, with locking screw.

Revolving dial for zero setting, two adjustable tolerance marks.

4203 With increased measuring force

4203 Inverted spring balancer

4200 Standard design

4203 Numbered anticlockwise

4203

4200

Measurement range mm

Order No.

Variant

Reading

Housing ∅

1 pointer revolution mm

mm

mm

0010 0015 0020 0025 0030

10 10 10 10 10

19.70

33.60 46.00

Standard design

0.01 0.01 0.01 0.01 0.01

58 58 58 58 58

1.0 1.0 1.0 1.0 1.0

– – – –

Numbered anticlockwise

52.70 ◊ 52.70 ◊

With increased measuring force With reduced measuring force With inverted spring balancer

51.60 (W423)

(W422)

4/45

Articles marked ◊ are not held in stock, procurement is effected at short notice.