Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital dial gauges 771

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

m

Digital dial gauge

Design: Clamping shaft and measuring bolts made of rustproof, hardened steel. Digit height of LCD 12 mm. With interchangeable stylus tips M2.5. Clamping shaft ∅ 8 mm, protective cap at end of measuring bolt. With data output RS 232, USB and Digimatic. Supplied with battery CR 2032, 3 V. Functions: Automatic on and off switch, mm/inch switching, automatic activation by moving switch, key lock set for zero position, re-zeroing after switching deleted (absolute system), reset (zeroing) possible at each position, counting direction change, ± pre-set function (setting a numerical value). Note: Suitable measuring inserts M2.5 are found on Ç 4/49. Replacement battery (Order No. 4026 2032, Ç 4/13).

Factory standard

Absolute function

IP 52

RS232

USB

Digimatic

Lifting cap (Order No. 4246 0165, Ç 4/54). Eyelet rear wall (Order No. 4246 0175, Ç 4/54). Data cable RS 232 (Order No. 4942 0055, Ç 4/130). Data cable USB (Order No. 4942 0050, Ç 4/130). Data cable Digimatic (Order No. 4246 0185, Ç 4/54).

4246

Measurement range mm

Order No. 0010 0015 0020

Reading mm

Housing ∅ mm

Accuracy mm

12.5 12.5 12.5

148.50 196.50 302.00 (W488)

0.01

53.8 53.8 53.8

0.02

0.005 0.001

0.015 0.005

Equipment

Measuring

m

Digital dial gauge with tolerance display

4

Design: Clamping shaft and measuring bolts made of rustproof, hardened steel. Digit height on LCD display 12 mm, operating and display part can be rotated by 280 °. With interchangeable stylus tips M2.5. Clamping shaft ∅ 8 mm, protective cap at end of measuring bolt. With data output RS 232, USB and Digimatic. Supplied with battery CR 2450, 3 V. Functions: Automatic on and off switch, mm/inch switching, automatic activation by moving switch, key lock set for zero position, re-zeroing after switching deleted (absolute system), tolerance entry, ABS (switching from relative to absolute measurement), reset (zeroing) possible at each position, counting direction change, ± pre-set function (setting a numerical

Factory standard

Absolute function

IP 42

RS232

USB

Digimatic

value). For reading 0.0005 mm with adjustable numerical increment. Note: Suitable measuring inserts M2.5 are found on Ç 4/49. Lifting cap (Order No. 4246 0165, Ç 4/54). Eyelet rear wall (Order No. 4246 0175, Ç 4/54). Data cable RS 232 (Order No. 4942 0055, Ç 4/130). Data cable USB (Order No. 4942 0050, Ç 4/130). Data cable Digimatic (Order No. 4246 0185, Ç 4/54).

4246

Measurement range mm

Order No. 0025 0030 0035 0040 Order No. 0045 0050 0055 0060

Reading mm

Housing ∅ mm

Accuracy mm

12.5 25.0 50.0 100.0

278.00 366.00 633.00 807.00 (W488)

0.01 0.01 0.01 0.01

60.5 60.5 60.5 60.5

0.02 0.02 0.02 0.02

4246 0.01 mm

4246

Measurement range mm

Reading mm 0.0005 0.0005 0.0005 0.0005

Housing ∅ mm

Accuracy mm

12.5 25.0 50.0 100.0

343.00 409.00 705.00 864.00 (W488)

60.5 60.5 60.5 60.5

0.004 0.004 0.007 0.008

4246 0.0005 mm

4/51

Articles marked ◊ are not held in stock, procurement is effected at short notice.