Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Digital dial gauges 772

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

m

Digital dial gauge with radio transmission

Design: Clamping shaft and measuring bolts made of rustproof, hardened steel. Digit height on LCD display 12 mm, operating and display part can be rotated by 280 °. With interchangeable stylus tips M2.5. Clamping shaft ∅ 8 mm, protective cap at end of measuring bolt. With data output via radio connection, RS 232, USB and Digimatic. Supplied with battery CR 2450, 3 V. Functions: Automatic on and off switch, mm/inch switching, automatic activation by moving switch, key lock set for zero position, re-zeroing after switching deleted (absolute system), tolerance entry, ABS (switching from relative to absolute measurement), reset (zeroing) possible at each position, counting direction change, ± pre-set function (setting a numerical value), with adjustable numerical increment. Note: Suitable measuring inserts M2.5 are found on Ç 4/49.

Factory standard

Absolute function

IP 42

RS232

USB

Digimatic

Lifting cap (Order No. 4246 0165, Ç 4/54). Eyelet rear wall (Order No. 4246 0175, Ç 4/54). Radio receiver (Order No. 4942 0030, Ç 4/129). Transmitter module for e-Stick (Order No. 4942 0040, Ç 4/130). Data cable RS 232 (Order No. 4942 0055, Ç 4/130). Data cable USB (Order No. 4942 0050, Ç 4/130). Data cable Digimatic (Order No. 4246 0185, Ç 4/54).

4246

Measurement range mm

Order No. 0065 0070 0085 0075 0080

Reading mm 0.0005 0.0005 0.0005 0.0005 0.0005

Housing ∅ mm

Accuracy mm

12.5 25.0 25.0* 50.0

395.00 447.00 447.00 738.00 900.00 (W488)

60.5 60.5 60.5 60.5 60.5

0.004 0.004 0.004 0.008 0.009

Equipment

Measuring

100.0

* Measuring force 0-0 N

4

m

Digital dial gauge, IP 54

Design: Clamping shaft and measuring bolts made of rustproof, hardened steel. Digit height on LCD display 11 mm, operating and display part can be rotated by 280°. With interchangeable stylus tips M2.5. Clamping shaft ∅ 8 mm, protective cap at end of measuring bolt. With data output via radio transmission, RS 232, USB and Digimatic. Supplied with battery CR 2450, 3 V. Functions: Automatic on and off switch, mm/inch switching, automatic activation by moving switch, key lock set for zero position, re-zeroing after switching deleted (absolute system), tolerance entry, ABS (switching from relative to absolute measurement), reset (zeroing) possible at each position, counting direction change, ± pre-set function (setting a numerical value), with adjustable numerical increment. Note: Suitable measuring inserts M2.5 are found on Ç 4/49.

Factory standard

Absolute function

IP 54

RS232

USB

Digimatic

Lifting cap (Order No. 4246 0165, Ç 4/54). Eyelet rear wall (Order No. 4246 0175, Ç 4/54). Radio receiver (Order No. 4942 0030, Ç 4/129). Transmitter module for e-Stick (Order No. 4942 0040, Ç 4/130). Data cable RS 232 (Order No. 4942 0055, Ç 4/130). Data cable USB (Order No. 4942 0050, Ç 4/130). Data cable Digimatic (Order No. 4246 0185, Ç 4/54).

4246

Measurement range mm

Order No. 0090 0100 0095 0105

Reading mm

Housing ∅ mm

Accuracy mm

With radio transmission

12.5 12.5 25.0 25.0

412.00 445.00 464.00 496.00 (W488)

0.0005 60.5 0.0005 60.5 0.0005 60.5 0.0005 60.5

0.004 0.004 0.004 0.004

–

•

–

•

4/52