Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Tracking devices/voltage tester 947

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Tracking device MultiFinder Plus

Design: Backlit LCD display with user guidance. Acoustic and optical signals for ease of use and warning notices for high operational reliability. Automatic calibration on different surfaces and containment of measurement objects, one-button operation. Supplied with battery. Application: For the location of joists, hollow spaces, pipes and wires in walls. In metal mode, non-live conductors below the plaster are also located. Measurement depth: Stud framing (wood/metal): 1– 4 cm Cavities: 1– 4 cm Copper: 0– 5 cm Iron: 0–10 cm Power lines: 0– 4 cm

5562

Order No. 0500

61.40 (W465)

CableTracer Pro cable locator

Design: Transmitter and receiver feature a high-contrast, illuminated LCD display. Exact localising of the device under test using the bar chart, numerical display and acoustic signals; also displays the DC and AC voltage. The encoded transmitter signal means that it is possible to use up to 7 transmitters and one receiver. In addition, the device features a permanent AC voltage warning, high transmitter frequency and measuring point illumination. Application: For the localising of electrical cables, fuses, circuit breakers, metal pipes as well as disconnections and short circuits in complex installations. Applicable with and without mains power, from 12 V to 400 V. Scope of delivery: locating device, connector cable, measuring probes, measuring clamps and 2 6LR61 monobloc batteries.

CAT III

5562

Hand Tools 5

Measuring depth

Order No. 0200

Voltage search: 0–0.4m Single pole measurement: 0–2.0m Bipolar measurement: 0–0.5m

252.00

(W465)

Voltage testers, single-pole

Design: Tested and approved according to VDE 0680/6 . Blades made of tool steel, nickel-plated. The display system (LED) is integrated into handle. Standard voltage tester, for 120–250 Volt . Handles made of clear plastic, with metal clip. Euro voltage tester, for 125–250 V. Handle made of red plastic with hand protection and insulated plastic clip. 5564 5532

5532

5532

5564

Total length mm

Order No. 0004 0005 0010

5564

140 150 190

1.17

–

–

1.56 1.92

1.47

(W514)

(W514)

Voltage testers, single-pole

Design: Tested and approved according to DIN 57680/6 and VDE 0680/6. Blades made of tool steel, insulated. The display system (LED) is integrated into the clear ABS plastic handle. With metal clip.

5563

Voltage range V

Order No. 0006

Total length mm

150–250

5.85

150

(W543)

5/73

Articles marked ◊ are not held in stock, procurement is effected at short notice.