Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Voltage testers/valve testers/automobile light testers 948

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

m

Voltage tester, inductive

Design: Alternating current. Made of break-resistant ABS plastic with test probe that lights up red and insulated plastic clip. Supplied with 2 AAA/LR03 micro batteries. Application: For the location of cable breaks, defect fuses in plugs and fixtures; checking of switches, sockets, transformers and FI switches as well as recognising phase conductors and live wires in distribution boxes. 110–1000 V Additionally with acoustic signal. Also suitable for the recognition of faulty in-line switches. 0010 5576

CAT III 1000 V

5576 0010

5576 0020

12–1000 V With LED flashlight in pin end. Additionally with discernible signal (vibration).

5576

Voltage range V

Order No. 0010 0020

Total length mm

5576 0020

110–1000 12–1000

15.10 21.60 (W513)

142 160

m

Voltage tester, inductive

Design: Alternating current. Made of plastic with test probe that lights up and insulated plastic clip. Supplied including 2 AAA/LR03 micro batteries. Application: For the location of cable breaks, defect fuses in plugs and fixtures, as well as faulty switches and bulbs connected in series.

SAGAB BY ELMA INSTRUMENTS

CAT III 1000 V

5569 0010 5569 0020

Volt stick ® With round test probe.

5569 0010

Volt Stick ® Bright With flat test probe and integrated bright torch. With two voltage rages and additional acoustic signal.

CAT IV 600 V

5569

Model

Order No. 0010 0020

Voltage range V

Total length mm

Hand Tools 5

20.80 31.20 (W514)

Volt stick ®

230–1000

156 153

Volt Stick ® Bright

20–1000/100–1000

5569 0020

m SAGAB BY ELMA INSTRUMENTS

Magnetic field tester, inductive

Design: Made of plastic with red illuminating probe all around, audible alarm and insulated plastic clip. Supplied with 2 AAA/LR03 micro batteries. Application: For the testing of magnetic valves in pneumatic and hydraulic systems, as well as in the servicing of oil burners. In addition, suitable for testing electrically controlled solenoid valves in vehicles or machinery of any kind.

5569

Model

Order No. 0030

Sensitivity

Total length mm

Magnet Stick

24.30 (W514)

0.3

152

Voltage and phase sequence testing, without contact

Design: Alternating current. Made of shatter-resistant ABS plastic with illuminating probe all around, depending on the test result green or red as well as acoustic signal generator and insulated plastic clip. With automatic shutdown after 5 minutes. Supplied with 2 AAA/LR03 micro batteries. Application: For locating cable breaks, testing for phase balance and the phase as well as phase sequence test in three-phase systems.

CAT IV 600 V

IP 53

5568

Voltage range V

Order No. 0150

Total length mm

200–1000

42.40 (W514)

153

Automobile light tester

Design: For 6–24 Volt, bipolar. Made of brass, with steel probe, solid cable and terminal.

5565

Total length mm

Order No. 0005

120

3.82 (W514)

5/74