Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Voltage tester 949

Prețurile sunt orientative. Solicitați oferta și veți obține prețuri mult mai avantajoase.

Car Check voltage tester

Design: For 5–48 Volt, bipolar, direct and alternating current. Made of plastic, probe tip with sliding mechanism as well as test line and rubber-insulated pole clamp. Application: Low electricity consumption makes it ideal for looking for faults in electrical components, as conventional test lamps often cause damage.

5570

Electricity consumption mA

Order No. 0005

Cable length cm

1.5

14.25 (W515)

130

Design: Tested and approved according to EN 61010 and EN 61243-3:2010, bipolar. Casing made of impact-resistant and unbreakable plastic, with rubber handle zone, two test handles and flexible connection cable. Supply includes batteries. Application: For professional testing of DC and AC voltages, continuity, phase and polarity as well as phase sequence detection and single pole testing. Order No. 1000 Display LED/LCD 5579 61.70 DC voltage 12–690 V AC voltage 12–690 V Continuity test Optical/acoustic Frequency 40–400 Hz Phase sequence test LED Phase test LED Polarity test LED Measuring point illumination yes Measurement category CAT IV 600 V, CAT III 1000 V Protection type IP 64 Batteries 2 x micro AAA/LR03 (W513) Voltage tester

CAT IV 600 V

IP 64

Hand Tools 5

Voltage tester

Design: Tested and approved in line with EN/IEC 61243-3 (DIN VDE 0682-401), bipolar. Casing made of impact-resistant and unbreakable plastic, with two test handles and flexible connection cable. The test handles can be connected and thus used single-handed. Supply includes batteries.

IP 65

Application: For the testing or direct and alternating current, as well as for continuity, semiconductor, polarity and phasing tests.

5571 0010

5572 0050

5573 0005

5574 0010

5572 0060

0010

0050

0060

0005

0010

Order No.

Model

Master Check

Combi Check

Combi Check Pro

Digi Check

Digi Check Pro

5571 5572 5573 5574 Display Voltage

37.80

–

–

– –

– – –

– – –

56.70

74.30

– –

– –

108.00

–

130.50

LED

LED

LED

LCD

LCD

6–400 V

6–690 V

6–690 V

0.3-690 V ≥ 300 kOhm

0.3-690 V ≥ 300 kOhm

Continuity test

– – – – –

–

≥ 300 kOhm

Semiconductor test Phase sequence test

yes

yes

yes

yes

LED

LED

LCD

LCD

HOLD function

–

–

yes

yes

Phase test Polarity test

LED LED

LED LED

LCD

LCD

LED

LCD, 4-digit

LCD, 4-digit

Load connection

– –

–

yes yes

–

yes yes

Measuring point illumination

yes

yes

Protection type

IP 65

IP 65

IP 65

IP 65

IP 65

Operating temperature

–15 °C to +45 °C

–15 °C to +45 °C –-15 °C to +45 °C –15 °C to +45 °C

–15 °C to +45 °C

Batteries

2 x micro AAA/LR03 2 x micro AAA/LR03 2 x micro AAA/LR03 2 x micro AAA/LR03 2 x micro AAA/LR03 (W515)

5/75

Articles marked ◊ are not held in stock, procurement is effected at short notice.