Catalog FORMAT plus 2017 - 2018 | Contact : 0799.402.346 | 0799.402.343 | e-mail : format@rocast.ro

Voltage tester 950

Ai nevoie de ajutor? Suntem aici pentru tine! 0799.402.346 / 0799.402.343 | format@rocast.ro

m

Design: Tested and approved in line with EN/IEC 61243-3 (DIN VDE 0682 Part 401), bipolar. Casing made of impact-resistant and unbreakable plastic, with rubber handle zone, two test handles and flexible connection cable. Direct display without push-button (high resistance), load connection via push buttons (low resistance), vibration alarm. Application: For the professional testing of direct and alternating currents, as well as for phasing and polarity tests with deliberate triggering of the earth leakage circuit breaker. Design: Casing made of impact-resistant and unbreakable plastic, with two test handles and flexible connection cable. The test handles can be connected and thus used single-handed. Supplied with battery. Application: For the professional testing of direct and alternating currents, as well as for phasing and polarity tests. Voltage display at levels 12; 24; 50; 120; 230; 400; 690 V also in empty or removed batteries. Order No. 0010 Model PROFIPOL ® + 5559 43.00 Display LED DC voltage 12–690 V AC voltage 12–690 V Continuity test LED, yellow/buzzer Phase test LED, red Polarity test LED Measurement category CAT III 600 V, CAT II 690 V Protection type IP 54 Batteries 2 x micro AAA/LR03 (W514) Voltage tester PROFIPOL ® + Voltage and continuity tester

CAT III 600 V

IP 54

CAT IV 600 V

IP 65

5560 0020

DUSPOL ® analog For the professional testing of voltage, phasing and polarity, as well as the rotary field direction.

Hand Tools 5

5560 0020

5560 0010

DUSPOL ® expert For professional checking voltage, continuity, phase and polarity as well as the phase sequence. No-contact phase tester/cable break detector (yellow LED flashing). Supplied with batteries, voltage display from 50 V even when the batteries are empty. DUSPOL ® digital For professional checking of voltage, continuity, diode, phase and polarity, phase sequence as well as measuring resistance and frequency. No-contact phase tester/cable break detector (yellow LED flashing). Measuring point and display lighting. Supplied with batteries, voltage display from 50 V even when the batteries are empty.

5560 0010

5560 0030

5560 0030

0020

0010

0030

Order No.

Model

DUSPOL ® analog

DUSPOL ® expert

DUSPOL ® digital

5560

52.50

62.00

94.40

Display

Plunger coil/LED

LED

LED/LCD 1–1200 V 1-1000 V

DC voltage AC voltage Resistance

12–1000 V 12–1000 V

12–1000 V 12–1000 V

– – –

–

0.1–300 kOhm

Continuity test

LED, yellow/buzzer

LED, yellow/buzzer

Frequency

–

1–1000 Hz LED, green

Phase sequence test

LCD LCD LED

LED, green

Phase test Polarity test

LED, red

LED, red

LED

LED

Load connection Vibration alarm

yes yes

yes yes yes

yes yes yes

Measuring point illumination

–

Measurement category Measuring procedure

CAT IV 600 V, CAT III 1000 V

CAT IV 600 V, CAT III 1000 V

CAT IV 600 V, CAT III 1000 V

–

–

TRUE RMS

Protection type

IP 65

IP 65

IP 65

Batteries

–

2 x micro AAA/LR03

2 x micro AAA/LR03

(W514)

5/76