html-Catalog FORMAT plus - EDE 2015 - 2017

Circle cutter and accessories 130

90° countersinks and deburring countersinks with morse taper shank

Design: HSS, DIN 335-D, 90° countersink angle. Axial and radial taper-ground and CBN deep-ground. With straight clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped back taper on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated designs. Same performance and quality features as 1430 or 1433, but with morse taper shank.

Z 3

HSS DIN

335-D

MK 1–4

90°

1 Cutting Tools

1450

blank right

1453 TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1450 1453

C C

V C

C C

V

1450

1453

1450

1453

Nominal ∅ mm

Nominal ∅ mm

Order No.

Smallest ∅ mm

Order No.

Smallest ∅ mm

Total length mm

Shank MK

Total length mm

Shank MK

bright

TiN

bright

TiN

1500 1650 2050 2300 2500 2600 3000 3100

15.0 16.5 20.5 23.0 25.0 26.0 30.0 31.0

32.60

–

3.2 3.2 3.5 3.8 3.8 3.8 4.2 4.2

85 85 100 106 106 106 112 112

1 1 2 2 2 2 2 2

3400 3700 4000 4500 5000 6300 8000

34.0 37.0 40.0 45.0 50.0 63.0 80.0

46.00 68.50 53.10 79.40 67.10 94.50 83.50 124.50 137.00 200.50 162.00 230.00 84.30 –

4.5 4.8 10.0 12.0 14.0 16.0 22.0

118 118 140 145 150 180 190

2 2 3 3 3 4 4

33.40 42.00 38.60 48.60

39.50

–

39.50 50.30

44.80

–

44.80 56.30 46.00 65.90

(134)

(134)

(134)

(134)

60° countersinks and deburring countersinks with cylinder Shank

Design: HSS, DIN 335-C. 60° countersink angle. Axial and radial taper-ground. With straight, u-shaped clamping slots and drilling spaces ground from full pieces. Also provided with cutting and clearance angles for the most common materials. Application: Suitable for universal chatter and burr-free drilling, countersinking and deburring work for countersunk screws DIN 963, DIN 964, DIN 965, DIN 966 and DIN 7991 in one step. Please note the large countersink range! The excellent cutting properties and easy machining process result from the cone-shaped back taper on the coat and angle of rake. The countersink achieves the best results with the strongest feed and lowest cutting speed. Note: Sufficient supply of coolant is essential for uncoated designs.

Z 3

HSS DIN

334-C

60°

1456

blank right

1459 TiN

Steels up to 850 N/mm 2

Steels up to 1000 N/mm 2

Steels up to 1400 N/mm 2

Hard machining over 60 HRC

Ti steels, Ti alloys, special steels

Stainless and acid- resistant steels (INOX)

Steels up to 42 HRC

Steels up to 52 HRC

Steels up to 56 HRC

Steels up to 60 HRC

Al, AI and Mg alloys

Copper, brass, bronze

Cast iron materials

Order No.

1456 1459

C C

V C

C C

V

1456

1459

1456

1459

Nominal ∅ mm

Nominal ∅ mm

Order No.

Smallest ∅ mm

Order No.

Smallest ∅ mm

Total length mm

Shank ∅ mm

Total length mm

Shank ∅ mm

bright

TiN

bright

TiN

0630 0800 1000 1250 1600

6.3 8.0 10.0 12.5

7.40 12.35 7.70 12.95 9.45 16.05 9.95 17.40

1.6 2.0 2.5 3.2 4.0

45 50 53 56 63

5 6 6 8

2000 2500 3150 4000

20.0 17.30 29.00 25.0 23.90 38.60 31.5 39.90 60.30 40.0 65.50 91.00

5.0 6.3 10.0 10.0

67 71 76 91

10 10 12 15

(134)

(134)

16.0 12.40 21.30

10

(134)

(134)

1/110

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).