html-Catalog FORMAT plus - EDE 2015 - 2017

Machine vices and accessories 662

Design: Cast iron body. Jaws are hardened, ground and burnished. With universal fixing option through mounting slots and oblong holes. With non-slip handle. Application: For clamping workpieces on drilling machines. Moreover, ideally suitable for fixing workpieces on measuring machines. Order No. Jaw width mm 3805 Jaw span mm Slot spacing mm Weight kg 0085 80 46.00 70 105 3.6 0100 100 59.50 92 125 4.3 0120 120 75.00 110 150 6.3 0150 150 123.50 125 170 8.1 (328) Drill-vice

Precision drill-vice

Design: Long design, Body made from special cast iron. The interchangeable jaws are milled and ground, one of the jaws is smooth and the other comes with longitudinal and transverse prisms. Both jaws have support surfaces to clamp flat workpieces. With universal fixing option

through oblong holes. With hexagon handle and cross bore. Application: For clamping workpieces on drilling machines.

Systems

3 Clamping

3807

Jaw width mm

Order No. 0080 0100 0125 0160

Jaw span mm

Slot spacing mm

Weight kg

80 100 125 160

108.50 183.00 276.50 462.50

70 110 130 225

110 140 165 210

4 9

15 29

(328)

Precision drill-vice

Design: With one-hand operation via eccentric, body made from special cast iron. The interchangeable jaws are milled and ground, one of the jaws is smooth and the other comes with longitudinal and transverse prisms. Both jaws have support surfaces to clamp flat work- pieces. With universal fixing option through mounting slots and oblong holes. With hexagon handle and cross bore. Application: For simple and fast clamping of workpieces on drilling machines.

3809

Jaw width mm

Order No. 0100 0125

Jaw span mm

Slot spacing mm

Weight kg

100 125

295.50 443.00

80 125

140 160

13 21

(328)

m

Spare clamp jaws

Design: Spare prismatic jaws in set including 4 screws. Note: Suitable for (Order No. 3807 and 3809).

3811

Jaw width mm

Order No. 0080 0100 0125 0160

80 100 125 160

43.10 57.90 67.30 75.30 (328)

Precision drill-vice

Design: Large clamping range, body made from special cast iron. The interchangeable and reversible jaws are hardened, ground and burnished, one of the jaws is smooth and the other comes with longitudinal and transverse prisms. Both jaws have support surfaces to clamp flat workpieces. With universal fixing option through mounting slots and oblong holes. With pushed-through T-handle. Application: For clamping workpieces on drilling machines. Note: Angle drive upon request.

3810

Jaw width mm

Order No. 1110 1135 1160

Jaw span mm

Slot spacing mm

Weight kg

110 135 160

275.00 335.00 525.00

130 160 220

140 170 210

9.5 13.5 25.0

(331)

3/122

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).