html-Catalog FORMAT plus - EDE 2015 - 2017

673

Coordinate table

Precision vices PL-G with threaded spindle

Design: Body and jaws made of alloyed tool steel, hardened and precision ground on all sides. The stationary jaw is smooth, the movable jaw comes with horizontal ground prism. Clamping and releasing through threaded spindle. Side clamping surfaces for clamping jaws. Supplied in wooden case. Angularity: 100 mm = 0.005 mm, Parallelism: 100 mm = 0.002 mm.

Application: Mainly in tool-making on grinding, milling and engraving machines, on boring machines, for measuring and inspection work and for manufacturing activities that demand highest clamping accuracy.

3879

Size

Order No. 0060 0070 0090

Jaw width mm

Jaw span mm

Jaw height mm

Total height mm

Total length mm

Tension force kN

Weight kg

0 1 2

200.00 250.00 300.00

60 73 88

55 100 125

25 35 40

50 67 88

110 210 250

2 4 4

1.6 4.0 7.6

(337)

Systems

3 Clamping

Precision sine vice PS-SV with front pivot axis

Design: Body and jaws made of alloy tool steel, hardened and precision ground. The stationary jaw is smooth, the movable jaw comes with horizontal ground prism. Clamping and releasing through threaded spindle. Angle adjustment with a setting range of 0°–46° is performed using gauge blocks according to the sinus principle; bearing pins and headed dowels are hardened and ground to an accuracy of 0.001 mm. The clamping device can be positively locked in every angular position. Supplied in wooden case. Angularity: 100 mm = 0.005 mm, Parallelism: 100 mm = 0.002 mm, Angular deviation at 45° ±15" . Application: For high working accuracy in tool-making when grinding, milling, measuring, etc.

3881

Size

Order No. 0070 0090

Jaw width mm

Jaw span mm

Jaw height mm

Total height mm

Total length mm

Tension force kN

Weight kg

1 2

1950.00 2950.00

70 90

80 120

30 40

93 113

160 210

6 7

5.3 11.0

(337)

Example: Wanted: Gauge block for angle adjustment of 24° 15‘ on the Precision sine bar machine vice PS-SV. Given: K = 100, sin α = 0.4107.

Formula for calculating the gauge block x x = sin α • K (for support surface A) x = sin α • K + 1 (for support surface B)

Calculation: x = 0.4107 • 100 = 41.07. The height of the gauge block 41.07 mm.

Coordinate table with dovetail guide

Design: From special cast iron, clamping surface and guides ground. Flatness accuracy is 0.03 mm, lead accuracy over 100 mm is 0.01 mm. The dove tail guides are adjustable by guide rails. Whirled trapezoidal threaded spindle with axial bearings. Graduated drums with zero point adjustment, thus direct reading without conversion possible. With scale division 0.05 mm.

Tables from 450 x 240 mm on are equipped with gully as well as clamping lever in both axes allowing clamping in any position. Application: For use on drilling machines and for light milling work. Note: Other designs and dimensions upon request.

3997

Clamping surface mm 300 x 160 450 x 240 580 x 240

Full height (-0.01)

Area

Order No.

No. of T-slots

T-slots width mm

Distance of T-slots mm

Longitudinal movement mm

Cross motion mm

Spindle pitch mm

Weight

Load bearing capacity kg

mm

kg

0010 0020 0030

1083.00 1981.00 ◊ 2071.00 ◊

3 3 3

10 14 14

50 60 60

180 275 375

100 155 155

2 5 5

75 280 280

78 160 x 160 16 126 259 x 200 52 126 259 x 200 60

(395)

3/133

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.