html-Catalog FORMAT plus - EDE 2015 - 2017

701

Clamping elements and accessories

Deep clamping jaw

Design: Tempered and annealed in burnished finish. Particularly flat design, no protruding clamping screws. Jaws clamp simultaneously forward and downward through wedge action. Application: For clamping low disks. Supplied: Deep clamping jaws (pair) complete with fastening screws DIN 912, nuts for T-slots DIN 508 (Order No. 3902) and hexagon screw driver DIN 911.

Systems

3 Clamping

3934

Order No. b mm I mm I 1 mm l 2 mm D F1 kN F2 kN 0012 12 69.00 3 20 40 80 39 26 M10 16 0.6 0014 14 74.60 3 20 40 80 39 26 M12 22 0.9 0016 16 80.20 3 20 40 80 39 26 M12 22 0.9 0018 18 98.00 4 25 50 100 46 34 M16 36 1.4 0020 20 105.00 4 25 50 100 46 34 M16 36 1.4 0022 22 172.50 5 30 78 140 65 50 M20 36 1.4 (340) Groove width mm c mm H mm

Flat clamps

Design: Steel, tempered and annealed in burnished finish. Advantages: • For clamping very flat workpieces • Lateral clamping of workpieces to machine surfaces completely without interfering contour • Horizontal and vertical deployment option Application: Insert flat clamps into machine table T-slot, position on workpiece, tighten fastening screws for machine table. The workpiece is clamped through operating the clamping screw. Supplied: Flat clamp, complete with fixtures for fastening. Note: We recommend using the AMF screw paste to reduce wear of the fastening screws. It has a synergistically acting combination of solid lubricants and is heat- and water-resistant.

Dimension table Order no.

B

H1 16 16 19 19 22 22 22

L

L1

L2 26 26 33 33 41 41 41

1214 1216 1618 1620 2022 2024 2028

44 44 56 56 62 62 62

110 110 130 130 152 152 152

45–48 45–48 50–54 50–54 58–63 58–63 58–63

3934

Size

Order No. 1214 1216 1618 1620 2022 2024 2028

Groove

G

F1 kN 15 15 20 20 30 30 30

F2 kN

H min. mm

H max. mm

Weight g 579 600 1011 1055 1670 1705 1807

M12 x 14 M12 x 16 M16 x 18 M16 x 20 M20 x 22 M20 x 24 M20 x 28

61.70 65.70 79.20 86.50

14 16 18 20 22 24 28

M12 M12 M16 M16 M20 M20 M20

7.5 7.5 10.0 10.0 15.0 15.0 15.0

16 16 19 19 22 22 22

25 25 30 30 36 36 36

121.00 149.00 157.50

(342)

3/161

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.