html-Catalog FORMAT plus - EDE 2015 - 2017

Clamping elements and accessories 700

Precision height correction wedge

Design: Made of case-hardened steel. The finely machined wedge surfaces allow smooth, sensitive adjustment, more precise than 1/10 mm. With 12 mm dia. centre hole. Operation possible using a spanner thus ensuring high safety and easy handling at high adjustment forces. The double wedge action gives precise vertical movement without lateral displacement. Higher safety properties when aligning heavy and large components is achieved thanks to the precision height-adjustable wedge flat design. The precision correcting wedge has an additional centring hole in the bottom base area (suitable for a pin ISO 8734 - 12 mm dia). Application: The correcting wedge can be adjusted under load. Height adjustment per revolution is 0.71 mm. Supplied: Correcting wedge with spherical adapter.

3898

Size

Order No. 0040 0250

H min. mm

H max. mm

F max. kN

A/F mm

Weight kg

55 85

786.00

50 55 40 22 2.8 77 85 250 36 11.5

1003.00

Systems

3 Clamping

(342)

Dimensions table Order No.

B1 G H1

H2 H3

L

L1

L2

0040 0250

60 20 60-65 47,5 10 128 150-179 60 100 30 87-95 74,0 20 210 242-287 81

Clamping claw, steplessly adjustable

Design: Clamping claw made of steel, forged, tempered and galvanised. Supplied: Clamping claw with screw for T-slots DIN 787 (Order no. 3900), hexagon nut DIN 6330B (3906) and washer DIN 6340 (Order no. 3909).

3931

Groove width mm

Order No.

b 1

T-slot screw Clamping height mm

d x l

mm

mm

5012 5014 5016 5018

12 14 16 18

33.80 34.40 37.20 37.20

17 M12 x 12 x 125 0–50 50 x 140 17 M12 x 14 x 125 0–50 50 x 140 17 M16 x 16 x 160 0–75 50 x 140 17 M16 x 18 x 160 0–75 50 x 140

(340)

Stable clamping jaw

Design: Base body made of malleable iron; clamping jaws of tempered steel, case-hardened. Height and stable design with a strong pull-down and resilience force. With interchangeable and reversible jaws with a fluted and a smooth side. Application: For lateral clamping of high workpieces. Note: Screws for T-slots DIN 787 (Order no. 3900) as fastening screws need to be ordered separately depending on slot width.

3933

Order No. b mm l mm l 1 mm e mm F1 kN F2 kN 0019 186.00 Slot width mm b 1 mm c mm H mm h 1 mm h 2 mm h 3 mm

12 14 16 18 20 22 24 28 30

19 8 85 38 99 40 65 179 112.5 12 8 15 20 28 26 11 100 45 118 40 75 230 138.5 12 25 25 32 32 36

1.2 2.2 3.0 4.2 4.5 4.5 4.8 4.8 5.4

0026

258.00

(340)

3/160

All stocked articles available within 24 hours by UPS Express.

All prices excluding VAT per piece (if not stated otherwise).