html-Catalog FORMAT plus - EDE 2015 - 2017

713

Clamping elements and accessories

Cross arm for toggle clamp

Design: Galvanised and passivated. Application: For simultaneous clamping of 2 small workpieces as well as for safe and tight clamping of large workpieces at 2 points. Fastening is possible above and below the clamping arm. Supplied: Complete with tempered pressure screws and fastening screw. Suitable for: Size 3 for toggle clamp (Order no. 3935, 3936, 3937, 3938, 3939, 3940, 3941 and 3949), Size 4 for toggle clamp (Order no. 3935, 3936, 3937, 3939, 3940, 3947 and 3949), Size 6 for toggle clamp (Order no. 3935, 3936, 3937).

3946

Size

Order No. 0010 0020 0030

Screw DIN 933 M8 x 45 M8 x 65 M12 x 80

Clamping range mm

Length mm

Weight g

3 4 6

17.55 19.65 29.40

34–100 40–125 54–200

120 150 240

200 370 985

(342)

Systems

3 Clamping

Pressure screw for open support arm

Design: Tempered, galvanised and passivated. Tensile strength class 8.8, with removable protective cap. Size 0–3 with washer element. Size 4–6 with nut for T-slot.

3946

Size

Order No.

Screw DIN 933

Nut for T-slot DIN 508

L

h min. mm

h max. mm

Weight

mm

g

0040 0045 0050 0060 0070 0080 0090

0/0

4.28 3.63 3.69 3.74 3.86 4.56 8.05 (342)

M4 x 25 M4 x 25 M5 x 30 M6 x 35 M8 x 45

– – – – –

32 13 32 13 38 17 45 19 58 22

20 5 20 5 24 10 28 22 34 40 50 62 58 160

0 1 2 3 4 6

M8 x 65 M8 x 10 78 21 M12 x 80 M12 x 14 97 28

Pressure screw protective cap

Design: From oil-resistant Neoprene (hardness 70 Shore A) to protect sensitive workpieces. Application: Suitable for pressure screw (Order no. 3946) or as spare part for all listed AMF clamps with protective cap.

3946

Size

Order No. 0100 0110 0120 0130 0140

A/F

Thread

d a mm

d p mm

H mm 8.5 10.0 12.0 15.0 20.0

h p mm 4.2 5.0 6.0 7.5 9.5

0/0 + 0

0.80 0.80 0.87 0.91 1.29 (342)

7 M4 8 M5 10 M6 13 M8

11.0 12.5 15.0 19.0 25.0

7 8

1 2

10 13 18

* As a result of the change of the screws M12 from DIN 933 to ISO 4017, the screw head changes from SW 19 to SW 18. The new A/F 18 protective cap is marked with ‘6’on the pressing-on surface.

3 + 4

6

18*

M12

3/173

Articles marked ◊ are not held in stock, procurement is effected at short notice.

Not all items are available in every country.